Xray T4'18 vs X1'18
Comparing compatible parts between the Xray RC-car models T4'18 and X1'18.
link Part # | T4'18 | X1'18 | Description | ||
---|---|---|---|---|---|
301145 | ✔ | ╌ | T4‘18 CHASSIS 2.2MM GRAPHITE | ||
301199 | ✔ | ╌ | T4‘18 UPPER DECK 2.0MM GRAPHITE | ||
301202 | ✔ | ╌ | COMPOSITE BUMPER | ||
301216 | ✔ | ╌ | COMPOSITE BUMPER UPPER HOLDER BRACE | ||
301218 | ✔ | ╌ | COMPOSITE UPPER HOLDER FOR BUMPER | ||
301227 | ✔ | ╌ | T4 FOAM BUMER - LIGHT & STRONG | ||
301322 | ✔ | ╌ | FRONT BODY MOUNT SET 6MM | ||
301325 | ✔ | ╌ | T4 COMPOSITE BRACE FOR BUMPER - LOW (2) | ||
301332 | ✔ | ╌ | REAR BODY MOUNT SET 6MM | ||
302034-O | ✔ | ╌ | ALU UPPER CLAMP WITH 4 ADJ. ROLL-CENTERS (L+R) - ORANGE | ||
302062 | ✔ | ╌ | T4 COMPOSITE ADJUSTMENT BALL-BEARING HUB (4) | ||
302084 | ✔ | ╌ | ULP SHOCK TOWER FRONT 3.0MM GRAPHITE | ||
302169 | ✔ | ╌ | FRONT SUSPENSION ARM - GRAPHITE - 1-HOLE | ||
302253 | ✔ | ╌ | COMPOSITE STEERING BLOCK - HARD - V2 | ||
302291 | ✔ | ╌ | STEEL STEERING BUSHING (2+2) | ||
302363 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 4° DEG. - MEDIUM (ECS) | ||
302364 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 4° DEG. - MEDIUM (ECS) | ||
302369 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 0° DEG. - HARD (ECS) | ||
302370 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 0° DEG. - HARD (ECS) | ||
302526 | ✔ | ╌ | COMPOSITE DUAL SERVO SAVER ARM | ||
302535 | ✔ | ╌ | ALU STEERING POST FOR DUAL SERVO SAVER (2) | ||
302536 | ✔ | ╌ | ALU STEERING POST FOR FLOATING SERVO SAVER (2) | ||
302804 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM | ||
302547-O | ✔ | ╌ | ALU STEERING PLATE 8.5MM FOR DUAL SERVO SAVER - ORANGE | ||
302612 | ✔ | ╌ | ALU ADJ. TURNBUCKLE M3 L/R 39 MM - SWISS 7075 T6 (2) | ||
302710-O | ✔ | ╌ | ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF | ||
302720-O | ✔ | ╌ | ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR | ||
302760-O | ✔ | ╌ | T4 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - ORANGE | ||
302761-O | ✔ | ╌ | T4 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE | ||
303001-O | ✔ | ╌ | T4‘18 ALU LAYSHAFT BULKHEAD RIGHT - ORANGE | ||
303002-O | ✔ | ╌ | T4‘18 ALU MOTOR MOUNT - ORANGE | ||
303003-O | ✔ | ╌ | T4‘18 ALU MOTOR MOUNT PLATE - ORANGE | ||
303085 | ✔ | ╌ | ULP SHOCK TOWER REAR 3.0MM GRAPHITE | ||
303129 | ✔ | ╌ | COMPOSITE SET OF SHIMS 3X 3X6X1MM; 1X 3X6X2MM (2) | ||
303169 | ✔ | ╌ | REAR SUSPENSION ARM - GRAPHITE - 1-HOLE | ||
303170 | ✔ | ╌ | ARS - ACTIVE REAR SUSPENSION ARM - HARD - 1-HOLE | ||
303212 | ✔ | ╌ | ALU ADJ. TURNBUCKLE L/R 26 MM - SWISS 7075 T6 (2) | ||
303354 | ✔ | ╌ | COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - HARD | ||
303455 | ✔ | ╌ | COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4) | ||
303803 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.3 MM | ||
303712-O | ✔ | ╌ | ALU LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - RIGHT | ||
303713-O | ✔ | ╌ | ALU LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - LEFT | ||
303720-O | ✔ | ╌ | ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR | ||
304900 | ✔ | ╌ | XRAY GEAR DIFFERENTIAL - SET | ||
304930 | ✔ | ╌ | COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) | ||
304970 | ✔ | ╌ | ALU GEAR DIFF OUTDRIVE ADAPTER - 7075 T6 (2) | ||
304980 | ✔ | ╌ | COMPOSITE GEAR DIFF CROSS PIN | ||
304990 | ✔ | ╌ | DIFF GASKET (4) | ||
305135 | ✔ | ╌ | COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS - V2 (2) | ||
305188 | ✔ | ╌ | COMPOSITE SOLID AXLE 38T - SET | ||
305221 | ✔ | ╌ | ECS (ES) DRIVE SHAFT 51MM FOR 2MM PIN - HUDY SPRING STEEL™ (1) | ||
305231 | ✔ | ╌ | DRIVE SHAFT COUPLING - HUDY SPRING STEEL | ||
305241 | ✔ | ╌ | DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4) | ||
305253 | ✔ | ╌ | ECS DRIVE SHAFT COUPLING FOR 2MM PIN - HUDY SPRING STEEL™ | ||
305328 | ✔ | ╌ | ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 50MM | ||
305334 | ✔ | ╌ | ECS ES (EXTRA STRONG) DRIVE SHAFT 51MM - HUDY SPRING STEEL™ - SET | ||
305341 | ✔ | ╌ | DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™ | ||
305346 | ✔ | ╌ | ECS DRIVE AXLE FOR 2MM PIN - HUDY SPRING STEEL™ | ||
305350-K | ✔ | ╌ | ALU WHEEL HUB - BLACK (2) | ||
305392 | ✔ | ╌ | DRIVE SHAFT PIN 2 X 10 WITH FLAT SPOT (2) | ||
305394 | ✔ | ╌ | ECS DRIVE SHAFT PIN 2 X 9 WITH FLAT SPOT (2) | ||
305432 | ✔ | ╌ | HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 X 513 MM | ||
305446 | ✔ | ╌ | HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 X 189 MM | ||
305521-K | ✔ | ╌ | ALU SOLID LAYSHAFT - BLACK | ||
305577 | ✔ | ╌ | FIXED PULLEY 20T (2) | ||
305784 | ✔ | ╌ | SPUR GEAR 84T / 48 | ||
306184 | ✔ | ╌ | LONG COMPOSITE LIPO BATTERY BACKSTOP (1+1) | ||
306201 | ✔ | ╌ | ALU SERVO MOUNT - LONG | ||
306204-O | ✔ | ╌ | T4‘17 ALU SERVO MOUNT - ORANGE | ||
306233 | ✔ | ╌ | T4‘17 GRAPHITE FLOATING SERVO HOLDER 3.0MM | ||
306530 | ✔ | ╌ | T4‘17 GRAPHITE CHASSIS STIFFENER 3.0MM | ||
307216 | ✔ | ╌ | SUSPENSION PIVOT PIN (2) | ||
307221 | ✔ | ╌ | FRONT ARM PIVOT PIN (2) | ||
307321 | ✔ | ╌ | REAR ARM PIVOT PIN (2) | ||
308043-O | ✔ | ╌ | ULP ALU SHOCK ADJUSTABLE NUT - ORANGE (2) | ||
308308-O | ✔ | ╌ | ULP ALU SHOCK ABSORBER-SET - ORANGE (2) | ||
308324 | ✔ | ╌ | ULP ALU SHOCK BODY (2) | ||
308334 | ✔ | ╌ | ULP COMPOSITE SHOCK PARTS | ||
308354-O | ✔ | ╌ | ULP ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2) | ||
308364 | ✔ | ╌ | T4 HARDENED SHOCK SHAFT (2) | ||
309001 | ✔ | ╌ | SET OF HIGH-SPEED BALL-BEARINGS (20) | ||
309301 | ✔ | ╌ | MOUNTING HARDWARE PACKAGE - SET | ||
309402 | ✔ | ╌ | BODY CLIP FOR 6MM BODY POST (4) | ||
362315 | ✔ | ╌ | ECCENTRIC BUSHING SET (2) | ||
362649 | ✔ | ╌ | BALL END 4.9MM WITH THREAD 5MM (2) | ||
362652 | ✔ | ╌ | BALL END 4.9MM WITH THREAD 10MM (2) | ||
372310-O | ✔ | ╌ | ALU LOWER GRAPHITE SUSPENSION ARM HOLDER - ORANGE | ||
293561 | ✔ | ╌ | HUDY ALU REAR WING SHIM (2) | ||
293561-O | ✔ | ╌ | HUDY ALU REAR WING SHIM - ORANGE (2) | ||
296510 | ✔ | ╌ | ALU COUNTERSUNK SHIM (10) | ||
296510-B | ✔ | ╌ | ALU COUNTERSUNK SHIM - BLUE (10) | ||
296510-O | ✔ | ╌ | ALU COUNTERSUNK SHIM - ORANGE (10) | ||
296510-V | ✔ | ╌ | ALU COUNTERSUNK SHIM - VIOLET (10) | ||
301146 | ✔ | ╌ | T4‘18 ALU CHASSIS 2.0MM - SWISS 7075 T6 | ||
301147 | ✔ | ╌ | T4‘18 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 | ||
301159 | ✔ | ╌ | ALU COUNTERSUNK SHIM (4) | ||
301159-O | ✔ | ╌ | ALU COUNTERSUNK SHIM - ORANGE (4) | ||
301169 | ✔ | ╌ | T4‘18 UPPER DECK 1.6MM GRAPHITE | ||
301203 | ✔ | ╌ | IMPACT ABSORBING FRONT BUMPER | ||
301213 | ✔ | ╌ | UPPER HOLDER FOR BUMPER - 2.5 MM GRAPHITE - CNC MACHINED | ||
301224 | ✔ | ╌ | T4 FOAM BUMPER | ||
301226 | ✔ | ╌ | T4 FOAM BUMPER - HARD | ||
301228 | ✔ | ╌ | T4 FOAM BUMPER WIDE - HARD | ||
301333 | ✔ | ╌ | REAR BODY MOUNT SET +1MM HEIGHT | ||
301334 | ✔ | ╌ | REAR BODY MOUNT SET +2MM HEIGHT | ||
302063 | ✔ | ╌ | T4 ALU ADJUSTMENT BALL-BEARING HUB (2) | ||
302085 | ✔ | ╌ | T4 SHOCK TOWER FRONT 3.0MM GRAPHITE | ||
302161 | ✔ | ╌ | FRONT SUSPENSION ARM - HARD | ||
302162 | ✔ | ╌ | FRONT SUSPENSION ARM - EXTRA-HARD | ||
302163 | ✔ | ╌ | FRONT SUSPENSION ARM - HARD - 1-HOLE | ||
302165 | ✔ | ╌ | FRONT SUSPENSION ARM - HARD - 2-HOLE | ||
302166 | ✔ | ╌ | FRONT SUSPENSION ARM - EXTRA-HARD - 2-HOLE | ||
302168 | ✔ | ╌ | FRONT SUSPENSION ARM - HARD - 1-HOLE | ||
302190 | ✔ | ╌ | GRAPHITE FRONT LOWER ARM PLATE 1.6MM (L+R) | ||
302201-O | ✔ | ╌ | ALU BRACE POST FOR ARS 3X5X9MM (2) | ||
302252 | ✔ | ╌ | COMPOSITE STEERING BLOCK - MEDIUM - V2 | ||
302254 | ✔ | ╌ | COMPOSITE STEERING BLOCK - GRAPHITE | ||
302256 | ✔ | ╌ | ALU STEERING BLOCK WITH BEARINGS - ORANGE | ||
302334 | ✔ | ╌ | ALU C-HUB FRONT BLOCK - 0° DEG. - ORANGE | ||
302335 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, RIGHT - 2° DEG. - ORANGE | ||
302336 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, LEFT - 2° DEG. - ORANGE | ||
302337 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, RIGHT - 4° DEG. - ORANGE | ||
302338 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, LEFT - 4° DEG - ORANGE | ||
302339 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, RIGHT - 6° DEG. - ORANGE | ||
302340 | ✔ | ╌ | ALU C-HUB FRONT BLOCK, LEFT - 6° DEG. - ORANGE | ||
302343 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, RIGHT - 2° DEG. | ||
302344 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, LEFT - 2° DEG. | ||
302345 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, RIGHT - 4° DEG. | ||
302346 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, LEFT - 4° DEG. | ||
302347 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, RIGHT - 6° DEG. | ||
302348 | ✔ | ╌ | COMPOSITE C-HUB FRONT BLOCK, LEFT - 6° DEG. | ||
302359 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 0° DEG. - MEDIUM (ECS) | ||
302360 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 0° DEG. - MEDIUM (ECS) | ||
302361 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 2° DEG. - MEDIUM (ECS) | ||
302362 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 2° DEG. - MEDIUM (ECS) | ||
302365 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 6° DEG. - MEDIUM (ECS) | ||
302366 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 6° DEG. - MEDIUM (ECS) | ||
302371 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 2° DEG. - HARD (ECS) | ||
302372 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 2° DEG. - HARD (ECS) | ||
302373 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 4° DEG. - HARD (ECS) | ||
302374 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 4° DEG. - HARD (ECS) | ||
302375 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 6° DEG. - HARD (ECS) | ||
302376 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 6° DEG. - HARD (ECS) | ||
302379 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 0° DEG. - GRAPHITE (ECS) | ||
302380 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 0° DEG. - GRAPHITE (ECS) | ||
302383 | ✔ | ╌ | COMPOSITE C-HUB RIGHT - 4° DEG. - GRAPHITE (ECS) | ||
302384 | ✔ | ╌ | COMPOSITE C-HUB LEFT - 4° DEG. - GRAPHITE (ECS) | ||
302525 | ✔ | ╌ | ALU DUAL SERVO SAVER ARM + BALL-BEARINGS (2) | ||
302570 | ✔ | ╌ | GRAPHITE STEERING PLATE SET | ||
302610 | ✔ | ╌ | ADJ. TURNBUCKLE L/R 40 MM - HUDY SPRING STEEL (2) | ||
302711 | ✔ | ╌ | BRASS FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF | ||
302802 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.2 MM | ||
302803 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.3 MM | ||
302805 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.5 MM | ||
302806 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.6 MM | ||
302712-O | ✔ | ╌ | ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF-LOW | ||
302721 | ✔ | ╌ | BRASS FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR | ||
302722-O | ✔ | ╌ | ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR-LOW | ||
303004 | ✔ | ╌ | T4‘18 BRASS MOTOR MOUNT PLATE | ||
303061 | ✔ | ╌ | LIPO CHASSIS GRAPHITE MOTOR GUARD | ||
303071 | ✔ | ╌ | BELT TENSIONER SET T2‘007, T2‘008, T2‘009, T3, T4 | ||
303086 | ✔ | ╌ | T4 SHOCK TOWER REAR 3.0MM GRAPHITE | ||
303128-K | ✔ | ╌ | ALU SHIM 3X6X6.0MM - BLACK (10) | ||
303161 | ✔ | ╌ | REAR SUSPENSION ARM - HARD | ||
303162 | ✔ | ╌ | REAR SUSPENSION ARM - EXTRA-HARD | ||
303163 | ✔ | ╌ | REAR SUSPENSION ARM - HARD - 1-HOLE - V2 | ||
303164 | ✔ | ╌ | REAR SUSPENSION ARM - EXTRA-HARD - 1-HOLE - V2 | ||
303165 | ✔ | ╌ | REAR SUSPENSION ARM - HARD - 2-HOLE | ||
303166 | ✔ | ╌ | REAR SUSPENSION ARM - EXTRA-HARD - 2-HOLE | ||
303167 | ✔ | ╌ | REAR SUSPENSION ARM - GRAPHITE - 1-HOLE | ||
303168 | ✔ | ╌ | REAR SUSPENSION ARM - HARD - 1-HOLE | ||
303171 | ✔ | ╌ | ARS - ACTIVE REAR SUSPENSION ARM - GRAPHITE - 1-HOLE | ||
303190 | ✔ | ╌ | GRAPHITE REAR LOWER ARM PLATE 1.6MM (L+R) | ||
303192 | ✔ | ╌ | GRAPHITE ARS REAR LOWER ARM PLATE 1.6MM (L+R) | ||
303210 | ✔ | ╌ | REAR TURNBUCKLE L/R 26 MM - HUDY SPRING STEEL (2) | ||
303212-O | ✔ | ╌ | ALU ADJ. TURNBUCKLE L/R 26 MM - ORANGE - SWISS 7075 T6 (2) | ||
303351 | ✔ | ╌ | COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT - MEDIUM | ||
303352 | ✔ | ╌ | COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - MEDIUM | ||
303353 | ✔ | ╌ | COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT - HARD | ||
303358 | ✔ | ╌ | ALU UPRIGHT 1° OUTBOARD TOE-IN (L+R) - ORANGE | ||
303360 | ✔ | ╌ | COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - GRAPHITE | ||
303361 | ✔ | ╌ | COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - MEDIUM | ||
303362 | ✔ | ╌ | COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - 1-HOLE - MEDIUM | ||
303363 | ✔ | ╌ | COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - HARD | ||
303364 | ✔ | ╌ | COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - 1-HOLE - HARD | ||
303801 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.1 MM | ||
303802 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.2 MM | ||
303804 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.4 MM | ||
303805 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.5 MM | ||
303806 | ✔ | ╌ | ANTI-ROLL BAR FOR BALL-BEARINGS - REAR 1.6 MM | ||
303710-O | ✔ | ╌ | ALU LOWER 2-PIECE SUSPENSION HOLDER (1) | ||
303714 | ✔ | ╌ | BRASS LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - RIGHT | ||
303715 | ✔ | ╌ | BRASS LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - LEFT | ||
303721 | ✔ | ╌ | BRASS REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR | ||
304932 | ✔ | ╌ | GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW | ||
304971 | ✔ | ╌ | GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) | ||
305136 | ✔ | ╌ | ALU SOLID AXLE DRIVESHAFT ADAPTERS - HARD COATED (2) | ||
305137 | ✔ | ╌ | STEEL SOLID AXLE DRIVESHAFT ADAPTERS - HUDY SPRING STEEL™ (2) | ||
305158 | ✔ | ╌ | TIMING BELT PULLEY 38T FOR MULTI-DIFF | ||
305242 | ✔ | ╌ | DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM - ORANGE - STRONG (4) | ||
305323 | ✔ | ╌ | DRIVE SHAFT 50MM - HUDY SPRING STEEL | ||
305324 | ✔ | ╌ | DRIVE SHAFT 52MM - HUDY SPRING STEEL | ||
305326 | ✔ | ╌ | ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM | ||
305332 | ✔ | ╌ | ECS ES (EXTRA STRONG) DRIVE SHAFT 52MM - HUDY SPRING STEEL™ - SET | ||
305333 | ✔ | ╌ | ECS ES (EXTRA STRONG) DRIVE SHAFT 50MM - HUDY SPRING STEEL™ - SET | ||
305351 | ✔ | ╌ | ALU WHEEL HUB - OFFSET „-0.75MM“ - BLACK (2) | ||
305352 | ✔ | ╌ | ALU WHEEL HUB - OFFSET „+0.75MM“ - BLACK (2) | ||
305353 | ✔ | ╌ | ALU WHEEL HUB - OFFSET „+1.5MM“ - BLACK (2) | ||
305380 | ✔ | ╌ | ALU WHEEL SHIM OFFSET 0.75MM (2) | ||
305434 | ✔ | ╌ | HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT FRONT 3 X 513 MM | ||
305447 | ✔ | ╌ | HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT REAR 3 X 189 MM | ||
305772 | ✔ | ╌ | OFFSET SPUR GEAR 72T / 48 - HARD | ||
305776 | ✔ | ╌ | OFFSET SPUR GEAR 76T / 48 - HARD | ||
305778 | ✔ | ╌ | OFFSET SPUR GEAR 78T / 48 - HARD | ||
305779 | ✔ | ╌ | OFFSET SPUR GEAR 79T / 48 - HARD | ||
305781 | ✔ | ╌ | OFFSET SPUR GEAR 81T / 48 - HARD | ||
305860 | ✔ | ╌ | OFFSET SPUR GEAR 90T / 64 | ||
305862 | ✔ | ╌ | OFFSET SPUR GEAR 92T / 64 | ||
305866 | ✔ | ╌ | OFFSET SPUR GEAR 96T / 64 | ||
305869 | ✔ | ╌ | OFFSET SPUR GEAR 99T / 64 | ||
305870 | ✔ | ╌ | OFFSET SPUR GEAR 100T / 64 | ||
305874 | ✔ | ╌ | OFFSET SPUR GEAR 104T / 64 | ||
305876 | ✔ | ╌ | OFFSET SPUR GEAR 106T / 64 | ||
305878 | ✔ | ╌ | OFFSET SPUR GEAR 108T / 64 | ||
305880 | ✔ | ╌ | OFFSET SPUR GEAR 110T / 64 | ||
305882 | ✔ | ╌ | OFFSET SPUR GEAR 112T / 64 | ||
305884 | ✔ | ╌ | OFFSET SPUR GEAR 114T / 64 | ||
306165 | ✔ | ╌ | T4 GRAPHITE BATTERY STRAP FOR LIPO - SET | ||
306186 | ✔ | ╌ | ALU LIPO BATTERY BACKSTOP (F+R) | ||
306188 | ✔ | ╌ | T4 GRAPHITE ADJUSTABLE BATTERY HOLDER | ||
306191 | ✔ | ╌ | T4 GRAPHITE + ALU FULLY ADJUSTABLE BATTERY HOLDER | ||
306194 | ✔ | ╌ | T4 GRAPHITE + BRASS FULLY ADJUSTABLE BATTERY HOLDER | ||
306410-O | ✔ | ╌ | ALU FAN MOUNT - ORANGE | ||
306516-O | ✔ | ╌ | T4 ALU TOP DECK MOUNT - ORANGE | ||
306531 | ✔ | ╌ | BRASS CHASSIS STIFFENER | ||
307217 | ✔ | ╌ | TITAN SUSPENSION PIVOT PIN (2) | ||
307222 | ✔ | ╌ | TITAN FRONT ARM PIVOT PIN (2) | ||
307322 | ✔ | ╌ | TITAN REAR ARM PIVOT PIN (2) | ||
308029 | ✔ | ╌ | ULP ALU PROGRESSIVE SHOCK SYSTEM - SET (2) | ||
308031 | ✔ | ╌ | ALU XRAY SHOCK SPRING RETAINING COLLAR (4) | ||
308031-O | ✔ | ╌ | ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) | ||
308031-K | ✔ | ╌ | ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4) | ||
308038 | ✔ | ╌ | COMPOSITE PROGRESSIVE PISTONS (4) | ||
308039 | ✔ | ╌ | ALU PROGRESSIVE SHOCK SYSTEM - SET (2) | ||
308307-K | ✔ | ╌ | 1/10 TOURING ALU SHOCK ABSORBER-SET - BLACK (2) | ||
308307-O | ✔ | ╌ | T4 ALU SHOCK ABSORBER-SET - ORANGE (2) | ||
309002 | ✔ | ╌ | SET OF CERAMIC BALL-BEARINGS (14) | ||
309500 | ✔ | ╌ | SILICONE GREASE 00 | ||
309855 | ✔ | ╌ | BRASS BATTERY BACKSTOP | ||
353561 | ✔ | ╌ | ALU REAR WING SHIM (2) | ||
306200-O | ╌ | ✔ | ALU SERVO MOUNT - ORANGE (2) | ||
308042-O | ╌ | ✔ | T4 ALU SHOCK ADJUSTABLE NUT - ORANGE (2) | ||
308323 | ╌ | ✔ | T4 ALU SHOCK BODY (2) | ||
308333 | ╌ | ✔ | T4 COMPOSITE SHOCK PARTS | ||
308353-O | ╌ | ✔ | T4 ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2) | ||
309400 | ╌ | ✔ | BODY CLIP (8) | ||
333452 | ╌ | ✔ | ALU ANTI-ROLL BAR PIVOT BALL 4.9 MM (2) | ||
338586 | ╌ | ✔ | SHIM 5X7X0.5 (10) | ||
362648 | ╌ | ✔ | BALL END 4.9MM WITH THREAD 4MM (2) | ||
371015 | ╌ | ✔ | X1‘18 GRAPHITE CHASSIS 2.5MM | ||
371064 | ╌ | ✔ | X1‘17 ARM MOUNT PLATE - 2.5MM GRAPHITE | ||
371077 | ╌ | ✔ | X1‘18 GRAPHITE REAR BRACE 2.5MM | ||
371094 | ╌ | ✔ | X1‘17 PLATE FOR MOUNTS - 2.5MM GRAPHITE | ||
371147 | ╌ | ✔ | X1 GRAPHITE 2.5MM REAR POD LOWER PLATE | ||
371182 | ╌ | ✔ | X1‘18 GRAPHITE POD LINK PLATE 2.5MM (2) | ||
371190 | ╌ | ✔ | COMPOSITE POD LINK (2) | ||
371201 | ╌ | ✔ | X1 COMPOSITE FRONT BUMPER | ||
371250 | ╌ | ✔ | X1 SPOILER LOW & HIGH DOWNFORCE (2) | ||
371320 | ╌ | ✔ | COMPOSITE BODY POST (2) | ||
372070 | ╌ | ✔ | COMPOSITE RIDE HEIGHT ADJUSTER SET - V2 (2) | ||
372115 | ╌ | ✔ | X1‘17 GRAPHITE LOWER SUSPENSION ARM 2.5MM | ||
372133 | ╌ | ✔ | X1‘17 GRAPHITE UPPER SUSPENSION ARM 2.5MM | ||
372180 | ╌ | ✔ | SPRING 4.0 COILS 3.6X6X0.5MM; C=3.5 - GOLD (2) | ||
372213 | ╌ | ✔ | X1 COMPOSITE STEERING BLOCK - 3-HOLE & BACKSTOPS | ||
372281 | ╌ | ✔ | X1 KING PIN (2) | ||
372290 | ╌ | ✔ | ALU SHIM 3.2X4.8X0.5 (4) | ||
372320 | ╌ | ✔ | X1 COMPOSITE ARM BUSHING (4) | ||
372321 | ╌ | ✔ | X1 COMPOSITE CASTER & CAMBER BUSHING (2+2+2+2) | ||
372410 | ╌ | ✔ | X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER - ORANGE | ||
372492 | ╌ | ✔ | ANTI-ROLL BAR - FRONT 1.2 MM | ||
372540 | ╌ | ✔ | X1 COMPOSITE STEERING ARM | ||
372550-O | ╌ | ✔ | X1 ALU STEERING PIVOT SHAFT | ||
372551-O | ╌ | ✔ | X1 ALU STEERING PIVOT SHAFT - SHORT | ||
372650 | ╌ | ✔ | BALL-END 4.2MM - THREADED - HUDY SPRING STEEL™ (2) | ||
372662 | ╌ | ✔ | COMPOSITE BALL-JOINT 4.2 MM (4) | ||
373012 | ╌ | ✔ | X1 ALU REAR BULKHEAD - MOTOR (RIGHT) + RIDE HEIGHT ADJUSTERS | ||
373022 | ╌ | ✔ | X1 ALU REAR BULKHEAD - LEFT + RIDE HEIGHT ADJUSTERS | ||
373034 | ╌ | ✔ | X1‘17 GRAPHITE REAR WING MOUNT 2.5MM | ||
373066 | ╌ | ✔ | ALU PIVOT BALL | ||
373073-O | ╌ | ✔ | ALU REAR BRACE MOUNT 13MM - ORANGE (2) | ||
373094 | ╌ | ✔ | COMPOSITE LOWER & UPPER PIVOT BRACE - LOW ROLL-CENTER - HARD - V3 | ||
373241 | ╌ | ✔ | COMPOSITE PIVOTBALL UNIVERSAL 6.0 MM (2) | ||
373242 | ╌ | ✔ | COMPOSITE PIVOTBALL UNIVERSAL 6.0 MM - SHORT (2) | ||
373243 | ╌ | ✔ | BALL END 6.0MM WITH THREAD 4MM (2) | ||
373512-K | ╌ | ✔ | X1 COMPOSITE ADJUSTABLE REAR WING - BLACK | ||
373548 | ╌ | ✔ | X1‘16 REAR POD UPPER PLATE - 2.5MM GRAPHITE | ||
373585 | ╌ | ✔ | SIDE SPRING C=0.9 - GOLD (2) | ||
373591 | ╌ | ✔ | COMPOSITE SIDE SPRING HOLDER (2) | ||
375012 | ╌ | ✔ | STEEL REAR AXLE SHAFT - HUDY SPRING STEEL™ | ||
375026 | ╌ | ✔ | X1 ALU REAR DRIVE AXLE - RIGHT | ||
375036 | ╌ | ✔ | X1 ALU REAR WHEEL HUB - RIGHT | ||
375046 | ╌ | ✔ | X1 ALU REAR WHEEL HUB - LEFT | ||
375050-O | ╌ | ✔ | ALU DIFF HUB - ORANGE | ||
375080 | ╌ | ✔ | D-LOCK DIFF PLATE (2) | ||
375090-O | ╌ | ✔ | SET OF ALU SHIMS 6.37X8.4MM (0.5MM, 1.0MM, 2.0MM) - ORANGE | ||
375221 | ╌ | ✔ | X1 FRONT WHEEL AXLE - HUDY SPRING STEEL (2) | ||
375896 | ╌ | ✔ | COMPOSITE SPUR GEAR - 96T / 64P | ||
376130 | ╌ | ✔ | COMPOSITE LIPO BATTERY BACKSTOP (2) | ||
376231 | ╌ | ✔ | X1‘18 GRAPHITE SERVO HOLDER 2.5MM | ||
376258-O | ╌ | ✔ | X1‘16 ALU SERVO MOUNT - ORANGE | ||
376361-O | ╌ | ✔ | ALU MOUNT 26.5MM - ORANGE (2) | ||
376364-O | ╌ | ✔ | ALU MOUNT 10.8MM - ORANGE (2) | ||
378062 | ╌ | ✔ | X1‘17 SHOCK SHAFT | ||
378072-O | ╌ | ✔ | X1‘17 ALU SHOCK SPRING COLLAR - ORANGE | ||
378073-O | ╌ | ✔ | X1‘18 ALU SHOCK ADAPTER - ORANGE | ||
102003 | ╌ | ✔ | HUDY EXCELLENT TIRE TRUER - FULLY AUTOMATIC 1/8, 1/10, 1/12 - FULL OPTION | ||
303136 | ╌ | ✔ | ALU SHIM 3X7X1.0MM (10) | ||
303136-O | ╌ | ✔ | ALU SHIM 3X7X1.0MM - ORANGE (10) | ||
303138-O | ╌ | ✔ | ALU SHIM 3X7X2.0MM - ORANGE (10) | ||
306200-K | ╌ | ✔ | ALU SERVO MOUNT - BLACK (2) | ||
338584 | ╌ | ✔ | SHIM 5X7X0.2 (10) | ||
338585 | ╌ | ✔ | SHIM 5X7X0.3 (10) | ||
371016 | ╌ | ✔ | X1‘18 ALU CHASSIS 2.0MM - 7075 T6 | ||
371017 | ╌ | ✔ | X1‘18 ALU FLEX CHASSIS 2.0MM - 7075 T6 | ||
371018 | ╌ | ✔ | X1‘18 GRAPHITE CHASSIS 2.0MM | ||
371148 | ╌ | ✔ | X1 ALU 2.0MM REAR POD LOWER PLATE - 7075 T6 | ||
371149 | ╌ | ✔ | X1 GRAPHITE 2.0MM REAR POD LOWER PLATE | ||
371202 | ╌ | ✔ | X1 COMPOSITE FRONT WING - BLACK - ETS APPROVED | ||
371290 | ╌ | ✔ | X1 ALU BODY POST PLATE | ||
372087 | ╌ | ✔ | X1 GRAPHITE FRONT ARM BRACE - 2.5MM | ||
372176 | ╌ | ✔ | SPRING 4.25 COILS 3.6X6X0.4MM; C=1.5 - GOLD (SOFT) (2) | ||
372177 | ╌ | ✔ | SPRING 4.75 COILS 3.6X6X0.45MM; C=2.0 - SILVER (SOFT) (2) | ||
372178 | ╌ | ✔ | SPRING 4.05 COILS 3.6X6X0.45MM; C=2.5 - BLACK (SOFT) (2) | ||
372179 | ╌ | ✔ | SPRING 4.25 COILS 3.6X6X0.5MM; C=3.0 - GREY (SOFT) (2) | ||
372181 | ╌ | ✔ | SPRING 4.75 COILS 3.6X6X0.55MM; C=4.0 - SILVER (2) | ||
372182 | ╌ | ✔ | SPRING 4.0 COILS 3.6X6X0.55MM; C=5.0 - BLACK (2) | ||
372183 | ╌ | ✔ | SPRING 4.25 COILS 3.6X6X0.6MM; C=6.0 - GREY (2) | ||
372325 | ╌ | ✔ | X1 ALU 1 DOT BUSHING - CAMBER 1.5-2 (2) | ||
372326 | ╌ | ✔ | X1 ALU 1 DOT BUSHING - CAMBER 1-2.5 (2) | ||
372327 | ╌ | ✔ | X1 ALU 1 DOT BUSHING - CASTER 6-9 (3) | ||
372328 | ╌ | ✔ | X1 ALU 1 DOT BUSHING - CASTER 3-12 (3) | ||
372491 | ╌ | ✔ | ANTI-ROLL BAR - FRONT 1.1 MM | ||
372493 | ╌ | ✔ | ANTI-ROLL BAR - FRONT 1.3 MM | ||
372494 | ╌ | ✔ | ANTI-ROLL BAR - FRONT 1.4 MM | ||
372541 | ╌ | ✔ | X1 ALU ADJUSTABLE SERVO SAVER SET | ||
372651 | ╌ | ✔ | PIVOT BALL UNIVERSAL 4.9 MM - HUDY SPRING STEEL (2) | ||
373240 | ╌ | ✔ | PIVOT BALL UNIVERSAL 6.0 MM - HUDY SPRING STEEL (2) | ||
373511-K | ╌ | ✔ | X1 COMPOSITE REAR WING - BLACK | ||
373513-K | ╌ | ✔ | X1 COMPOSITE ADJUSTABLE REAR WING - BLACK - ETS APPROVED | ||
373584 | ╌ | ✔ | SIDE SPRING C=0.6 - SILVER (2) | ||
373586 | ╌ | ✔ | SIDE SPRING C=1.2 - BLACK (2) | ||
373587 | ╌ | ✔ | SIDE SPRING C=1.5 - SILVER (MEDIUM) (2) | ||
373588 | ╌ | ✔ | SIDE SPRING C=1.8 - GOLD (MEDIUM) (2) | ||
375010 | ╌ | ✔ | REAR AXLE SHAFT - GRAPHITE - V3 | ||
375093-O | ╌ | ✔ | ALU SHIM 6.37X8.4X6.0MM - ORANGE (2) | ||
375872 | ╌ | ✔ | COMPOSITE SPUR GEAR - 72T / 64P | ||
375875 | ╌ | ✔ | COMPOSITE SPUR GEAR - 75T / 64P | ||
375876 | ╌ | ✔ | COMPOSITE SPUR GEAR - 76T / 64P | ||
375878 | ╌ | ✔ | COMPOSITE SPUR GEAR - 78T / 64P | ||
375880 | ╌ | ✔ | COMPOSITE SPUR GEAR - 80T / 64P | ||
378100 | ╌ | ✔ | SIDE SHOCK ABSORBER SET | ||
378141 | ╌ | ✔ | X1 SIDE TUBE TUBE (2) | ||
378153 | ╌ | ✔ | X1 COMPOSITE SIDE TUBE SHAFT (2) | ||
379001 | ╌ | ✔ | X1 BALL-BEARING SET | ||
379300 | ╌ | ✔ | MOUNTING HARDWARE PACKAGE FOR XII - SET | ||
379701 | ╌ | ✔ | XRAY X1‘16 1/10 FORMULA BODY | ||
803070 | ╌ | ✔ | HUDY 1/10 FORMULA RUBBER TIRE - FRONT (2) | ||
803080 | ╌ | ✔ | HUDY 1/10 FORMULA RUBBER TIRE - REAR (2) | ||
930230 | ╌ | ✔ | CERAMIC BALL 3.175MM (12) | ||
930238 | ╌ | ✔ | CERAMIC BALL-BEARING AXIAL F3-8 3X8X3.5 | ||
960031 | ╌ | ✔ | ALU NUT M3 (10) | ||
302612-O | ✔ | ✔ | ALU ADJ. TURNBUCKLE M3 L/R 39 MM - ORANGE - SWISS 7075 T6 (2) | ||
302663 | ✔ | ✔ | COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) | ||
302665 | ✔ | ✔ | COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4) | ||
303123-O | ✔ | ✔ | ALU SHIM 3X6X2.0MM - ORANGE (10) | ||
303127-K | ✔ | ✔ | ALU SHIM 3X6X4.0MM - BLACK (10) | ||
303241 | ✔ | ✔ | PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4) | ||
303432-O | ✔ | ✔ | ALU ANTI-ROLL BAR BUSHING - ORANGE (2) | ||
303454 | ✔ | ✔ | BALL JOINT 4.9MM - OPEN (4) | ||
306219 | ✔ | ✔ | COMPOSITE SET OF SERVO SHIMS (4) | ||
306301 | ✔ | ✔ | ANTENNA MOUNT - THIN | ||
306310 | ✔ | ✔ | ANTENNA (2) | ||
308037 | ✔ | ✔ | T4 COMPOSITE PISTONS 4-HOLE 1.0-1.2MM, 3-HOLE 1.0-1.2MM | ||
308082 | ✔ | ✔ | T4 SHOCK ABSORBER MEMBRANE (4) | ||
308092 | ✔ | ✔ | T4 SHOCK FOAM INSERT (4) | ||
308274 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.3 (2) | ||
308316 | ✔ | ✔ | SHOCK BALL JOINT - OPEN (4) | ||
308327-O | ✔ | ✔ | ALU CAP FOR XRAY SHOCK BODY #308322 - ORANGE (2) | ||
362650 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 6MM (2) | ||
362651 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 8MM (2) | ||
372503 | ✔ | ✔ | COMPOSITE SERVO SAVER - X-STIFF - SET - V2 | ||
296530-O | ✔ | ✔ | ALU NUT M3 - ORANGE (10) | ||
296530-B | ✔ | ✔ | ALU NUT M3 - BLUE (10) | ||
296530-K | ✔ | ✔ | ALU NUT M3 - BLACK (10) | ||
301323 | ✔ | ✔ | FRONT BODY MOUNT SET +1MM HEIGHT | ||
301324 | ✔ | ✔ | FRONT BODY MOUNT SET +2MM HEIGHT | ||
301351-O | ✔ | ✔ | ALU ADJUSTABLE BODY POST STOP (2) | ||
303120 | ✔ | ✔ | SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM) | ||
303121 | ✔ | ✔ | SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM) | ||
303121-K | ✔ | ✔ | ALU SHIM 3X6X0.5MM - BLACK (10) | ||
303121-O | ✔ | ✔ | ALU SHIM 3X6X0.5MM - ORANGE (10) | ||
303122 | ✔ | ✔ | ALU SHIM 3X6X1.0MM (10) | ||
303122-K | ✔ | ✔ | ALU SHIM 3X6X1.0MM - BLACK (10) | ||
303122-O | ✔ | ✔ | ALU SHIM 3X6X1.0MM - ORANGE (10) | ||
303123 | ✔ | ✔ | ALU SHIM 3X6X2.0MM (10) | ||
303123-K | ✔ | ✔ | ALU SHIM 3X6X2.0MM - BLACK (10) | ||
303125 | ✔ | ✔ | ALU SHIM 3X6X3.0MM (10) | ||
303125-K | ✔ | ✔ | ALU SHIM 3X6X3.0MM - BLACK (10) | ||
303126-K | ✔ | ✔ | ALU SHIM 3X6X5.0MM - BLACK (10) | ||
308263 | ✔ | ✔ | XRAY 4S SPRING-SET PROGRESSIVE C=2.3-2.6 (2) | ||
308264 | ✔ | ✔ | XRAY 4S SPRING-SET PROGRESSIVE C=2.5-2.8 (2) | ||
308275 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.5 (2) | ||
308276 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.7 (2) | ||
308277 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.9 (2) | ||
308286 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.6 (2) | ||
308288 | ✔ | ✔ | XRAY 4S SPRING-SET C=2.8 (2) |