Xray X1'15 vs XB2'19
Comparing compatible parts between the Xray RC-car models X1'15 and XB2'19.
link Part # | X1'15 | XB2'19 | Description | ||
---|---|---|---|---|---|
302612-O | ✔ | ╌ | ALU ADJ. TURNBUCKLE M3 L/R 39 MM - ORANGE - SWISS 7075 T6 (2) | ||
302652 | ✔ | ╌ | BALL END 4.9MM WITH THREAD 4MM (2) | ||
303127-K | ✔ | ╌ | ALU SHIM 3X6X4.0MM - BLACK (10) | ||
303211-O | ✔ | ╌ | ALU ADJ. TURNBUCKLE L/R 30 MM - SWISS 7075 T6 (2) | ||
303241 | ✔ | ╌ | PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4) | ||
306200-O | ✔ | ╌ | ALU SERVO MOUNT - ORANGE (2) | ||
306301 | ✔ | ╌ | ANTENNA MOUNT - THIN | ||
306310 | ✔ | ╌ | ANTENNA (2) | ||
308036 | ✔ | ╌ | COMPOSITE NON-ADJUSTABLE PISTONS - DELRIN - V3 | ||
308040-O | ✔ | ╌ | SHOCK ADJ. NUT ALU + O-RING - ORANGE (4) | ||
308082 | ✔ | ╌ | T4 SHOCK ABSORBER MEMBRANE (4) | ||
308092 | ✔ | ╌ | T4 SHOCK FOAM INSERT (4) | ||
308306-O | ✔ | ╌ | XRAY ALU SHOCK ABSORBER-SET - ORANGE (2) | ||
308316 | ✔ | ╌ | SHOCK BALL JOINT - OPEN (4) | ||
308322 | ✔ | ╌ | ALU XRAY SHOCK BODY FOR #308306 (2) | ||
308327-O | ✔ | ╌ | ALU CAP FOR XRAY SHOCK BODY #308322 - ORANGE (2) | ||
308331 | ✔ | ╌ | COMPOSITE FRAME SHOCK PARTS 4-STEP - SHORT | ||
308352-O | ✔ | ╌ | ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2) | ||
308363 | ✔ | ╌ | HARDENED SHOCK SHAFT FOR ALU SHOCKS (2) | ||
308373 | ✔ | ╌ | XRAY SPRING-SET C=2.2 (2) | ||
309400 | ✔ | ╌ | BODY CLIP (8) | ||
338586 | ✔ | ╌ | SHIM 5X7X0.5 (10) | ||
371003 | ✔ | ╌ | X1 CHASSIS - 2.5MM GRAPHITE | ||
371062 | ✔ | ╌ | X1 GRAPHITE 2.5MM ARM MOUNT PLATE | ||
371073 | ✔ | ╌ | X1 REAR BRACE - GRAPHITE 2.5MM | ||
371092 | ✔ | ╌ | X1 GRAPHITE PLATE FOR MOUNTS 2.5MM | ||
371147 | ✔ | ╌ | X1 GRAPHITE 2.5MM REAR POD LOWER PLATE | ||
371190 | ✔ | ╌ | COMPOSITE POD LINK (2) | ||
371201 | ✔ | ╌ | X1 COMPOSITE FRONT BUMPER | ||
371250 | ✔ | ╌ | X1 LEXAN FRONT WING (2) | ||
371320 | ✔ | ╌ | COMPOSITE BODY POST (2) | ||
372070 | ✔ | ╌ | COMPOSITE RIDE HEIGHT ADJUSTER SET - V2 (2) | ||
372114 | ✔ | ╌ | X1 GRAPHITE LOWER SUSPENSION ARM 2.5MM | ||
372132 | ✔ | ╌ | X1 GRAPHITE UPPER SUSPENSION ARM 2.5MM | ||
372180 | ✔ | ╌ | FRONT COIL SPRING 3.6X6X0.5MM; C=3.5 - GOLD (2) | ||
372212 | ✔ | ╌ | X1 COMPOSITE STEERING BLOCK & BACKSTOPS | ||
372281 | ✔ | ╌ | X1 KING PIN (2) | ||
372290 | ✔ | ╌ | ALU SHIM 3.2X4.8X0.5 (4) | ||
372320 | ✔ | ╌ | X1 COMPOSITE ARM BUSHING (4) | ||
372321 | ✔ | ╌ | X1 COMPOSITE CASTER & CAMBER BUSHING (2+2+2+2) | ||
372540 | ✔ | ╌ | X1 COMPOSITE STEERING ARM | ||
372550-O | ✔ | ╌ | X1 ALU STEERING PIVOT SHAFT | ||
372651 | ✔ | ╌ | PIVOT BALL UNIVERSAL 4.9 MM - HUDY SPRING STEEL (2) | ||
373012 | ✔ | ╌ | X1 ALU REAR BULKHEAD - MOTOR (RIGHT) | ||
373022 | ✔ | ╌ | X1 ALU REAR BULKHEAD - LEFT | ||
373031 | ✔ | ╌ | X1 GRAPHITE REAR BULKHEAD BRACE | ||
373066 | ✔ | ╌ | ALU PIVOT BALL | ||
373073-O | ✔ | ╌ | ALU REAR BRACE MOUNT 13MM - ORANGE (2) | ||
373092 | ✔ | ╌ | COMPOSITE LOWER & UPPER PIVOT BRACE - LOW ROLL-CENTER | ||
373241 | ✔ | ╌ | COMPOSITE PIVOTBALL UNIVERSAL 6.0 MM (2) | ||
373242 | ✔ | ╌ | COMPOSITE PIVOTBALL UNIVERSAL 6.0 MM - SHORT (2) | ||
373511-K | ✔ | ╌ | X1 COMPOSITE REAR WING - BLACK | ||
373546 | ✔ | ╌ | X1 REAR POD UPPER PLATE - GRAPHITE 2.5MM | ||
373585 | ✔ | ╌ | SIDE SPRING C=0.9 - GOLD (2) | ||
373590 | ✔ | ╌ | COMPOSITE SPRING HOLDER & NUT (2+1) | ||
373591 | ✔ | ╌ | COMPOSITE SIDE SPRING HOLDER (2) | ||
375012 | ✔ | ╌ | STEEL REAR AXLE SHAFT - HUDY SPRING STEEL™ | ||
375026 | ✔ | ╌ | X1 ALU REAR DRIVE AXLE - RIGHT | ||
375036 | ✔ | ╌ | X1 ALU REAR WHEEL HUB - RIGHT | ||
375046 | ✔ | ╌ | X1 ALU REAR WHEEL HUB - LEFT | ||
375050-O | ✔ | ╌ | ALU DIFF HUB - ORANGE | ||
375080 | ✔ | ╌ | D-LOCK DIFF PLATE (2) | ||
375090-O | ✔ | ╌ | SET OF ALU SHIMS 6.37X8.4MM (0.5MM, 1.0MM, 2.0MM) - ORANGE | ||
375221 | ✔ | ╌ | X1 FRONT WHEEL AXLE - HUDY SPRING STEEL (2) | ||
375896 | ✔ | ╌ | COMPOSITE SPUR GEAR - 96T / 64P | ||
376130 | ✔ | ╌ | COMPOSITE LIPO BATTERY BACKSTOP (2) | ||
376361-O | ✔ | ╌ | ALU ANTENNA HOLDER MOUNT 26.5MM - ORANGE (2) | ||
376364-O | ✔ | ╌ | ALU MOUNT 10.8MM - ORANGE (2) | ||
377220 | ✔ | ╌ | FRONT UPPER PIVOT PIN 2X32MM (2) | ||
378010 | ✔ | ╌ | COMPOSITE SHOCK PARTS - FRAME | ||
378030-O | ✔ | ╌ | ALU SHOCK BODY CAP - LOWER - ORANGE | ||
378100 | ✔ | ╌ | SIDE SHOCK ABSORBER SET | ||
378110 | ✔ | ╌ | COMPOSITE SIDE SHOCK PARTS - FRAME | ||
378120 | ✔ | ╌ | ALU SIDE SHOCK BODY - HARDCOATED | ||
378160 | ✔ | ╌ | SIDE SHOCK SHAFT | ||
378170-O | ✔ | ╌ | ALU SIDE SHOCK COLLAR - ORANGE | ||
379000 | ✔ | ╌ | BALL-BEARING SET (9) | ||
379300 | ✔ | ╌ | MOUNTING HARDWARE PACKAGE FOR XII - SET | ||
379700 | ✔ | ╌ | XRAY X1 BODY FOR 1/10 FORMULA | ||
306200-K | ✔ | ╌ | ALU SERVO MOUNT - BLACK (2) | ||
308332 | ✔ | ╌ | COMPOSITE SHOCK PARTS - REBOUND HOLE - SHORT | ||
308374 | ✔ | ╌ | XRAY SPRING-SET C=2.4 (2) | ||
308377 | ✔ | ╌ | XRAY SPRING-SET C=3.0 (2) | ||
308378 | ✔ | ╌ | XRAY SPRING-SET C=3.2 (2) | ||
308379 | ✔ | ╌ | XRAY SPRING-SET C=3.4 (2) | ||
338584 | ✔ | ╌ | SHIM 5X7X0.2 (10) | ||
338585 | ✔ | ╌ | SHIM 5X7X0.3 (10) | ||
372087 | ✔ | ╌ | X1 GRAPHITE FRONT ARM BRACE - 2.5MM | ||
372181 | ✔ | ╌ | FRONT COIL SPRING 3.6X6X0.5MM; C=4.0 - SILVER (2) | ||
372182 | ✔ | ╌ | FRONT COIL SPRING 3.6X6X0.5MM; C=5.0 - BLACK (2) | ||
372183 | ✔ | ╌ | FRONT COIL SPRING 3.6X6X0.5MM; C=6.0 - GREY (2) | ||
373240 | ✔ | ╌ | PIVOT BALL UNIVERSAL 6.0 MM - HUDY SPRING STEEL (2) | ||
373584 | ✔ | ╌ | SIDE SPRING C=0.6 - SILVER (2) | ||
373586 | ✔ | ╌ | SIDE SPRING C=1.2 - BLACK (2) | ||
375010 | ✔ | ╌ | REAR AXLE SHAFT - GRAPHITE - V3 | ||
375876 | ✔ | ╌ | COMPOSITE SPUR GEAR - 76T / 64P | ||
375878 | ✔ | ╌ | COMPOSITE SPUR GEAR - 78T / 64P | ||
375880 | ✔ | ╌ | COMPOSITE SPUR GEAR - 80T / 64P | ||
930230 | ✔ | ╌ | CERAMIC BALL 3.175MM (12) | ||
930238 | ✔ | ╌ | CERAMIC BALL-BEARING AXIAL F3-8 3X8X3.5 | ||
303141 | ╌ | ✔ | ALU SHIM 3X5X1.0MM (10) | ||
303454 | ╌ | ✔ | BALL JOINT 4.9MM - OPEN (4) | ||
304932 | ╌ | ✔ | GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW | ||
304980 | ╌ | ✔ | COMPOSITE GEAR DIFF CROSS PIN | ||
321104 | ╌ | ✔ | ALU CHASSIS - SWISS 7075 T6 (2.5MM) | ||
321160-H | ╌ | ✔ | COMPOSITE FRONT UPPER DECK - HARD | ||
321200 | ╌ | ✔ | COMPOSITE FRONT BUMPER | ||
321210 | ╌ | ✔ | ALU FRONT LOWER ARM MOUNT BRACE - SWISS 7075 T6 (3MM) | ||
321260-M | ╌ | ✔ | COMPOSITE CHASSIS SIDE GUARDS L+R - MEDIUM | ||
321262-H | ╌ | ✔ | COMPOSITE FRONT LOWER CHASSIS BRACE - HARD | ||
293561 | ╌ | ✔ | HUDY ALU REAR WING SHIM (2) | ||
296510 | ╌ | ✔ | ALU COUNTERSUNK SHIM (10) | ||
303129 | ╌ | ✔ | COMPOSITE SET OF SHIMS 3X 3X6X1MM; 1X 3X6X2MM (2) | ||
303143 | ╌ | ✔ | ALU SHIM 3X5X0.25MM (10) | ||
305231 | ╌ | ✔ | DRIVE SHAFT COUPLING - HUDY SPRING STEEL | ||
320900 | ╌ | ✔ | COMPLETE XB2 DIRT REAR SUSPENSION CONVERSION SET | ||
320901 | ╌ | ✔ | XRAY XB2 FACTORY TEAM UPGRADE FOR CARPET | ||
321102 | ╌ | ✔ | XB2 GRAPHITE CHASSIS 2.5MM | ||
321103 | ╌ | ✔ | ALU CHASSIS - FLEX - SWISS 7075 T6 (2MM) | ||
321190 | ╌ | ✔ | XB2 GRAPHITE FRONT WING HOLDER | ||
321211 | ╌ | ✔ | ALU FRONT LOWER ARM MOUNT 23°/29° BRACE - SWISS 7075 T6 (3MM) | ||
321264 | ╌ | ✔ | COMPOSITE FRONT CHASSIS SIDE BRACE - SHORT (2) | ||
321266 | ╌ | ✔ | GRAPHITE CHASSIS SIDE GUARD BRACE - SOFT (2) | ||
321290 | ╌ | ✔ | COMPOSITE WIRE HOLDER (2) | ||
322040-H | ╌ | ✔ | COMPOSITE FRONT ROLL-CENTER HOLDER - HARD | ||
322084 | ╌ | ✔ | GRAPHITE SHOCK TOWER FRONT 4.0MM - LOWER | ||
322110-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER - HARD | ||
322210-H | ╌ | ✔ | COMPOSITE C-HUB RIGHT - HARD | ||
322220-H | ╌ | ✔ | COMPOSITE C-HUB LEFT - HARD | ||
322250-H | ╌ | ✔ | COMPOSITE STEERING BLOCK - HARD | ||
322280 | ╌ | ✔ | COMPOSITE CASTER BUSHING (2X 0°, 2.5°, 5°) | ||
322291 | ╌ | ✔ | GRAPHITE EXTENSION FOR STEERING BLOCK (2) - 1 SLOT | ||
322311 | ╌ | ✔ | COMPOSITE FRONT LOWER ARM MOUNT 26° KICK-UP | ||
322511 | ╌ | ✔ | COMPOSITE STEERING ARM (2) | ||
322550 | ╌ | ✔ | ALU SERVO SAVER PIVOT SHAFT (2) | ||
322571 | ╌ | ✔ | COMPOSITE STEERING PLATE | ||
322610 | ╌ | ✔ | ADJUSTABLE TURNBUCKLE 55MM M3 L/R - HUDY SPRING STEEL™ (2) | ||
323015 | ╌ | ✔ | COMPOSITE FRONT-MID MOTOR GEAR BOX (3 GEARS) - NARROW - SET | ||
323040 | ╌ | ✔ | COMPOSITE REAR ROLL-CENTER HOLDER - CARPET EDITION | ||
323084 | ╌ | ✔ | GRAPHITE SHOCK TOWER REAR 3.5MM - LOWER | ||
323110-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD | ||
323120-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD | ||
323313 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER - NARROW - FRONT - SWISS 7075 T6 (5MM) | ||
323324 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER - NARROW - REAR - SWISS 7075 T6 (5MM) | ||
323354-H | ╌ | ✔ | COMPOSITE UPRIGHT REAR - HARD | ||
323381 | ╌ | ✔ | ALU REAR HUB PLATE FOR MULTI ADJUSTABLE UPRIGHT - SWISS 7075 T6 | ||
323510 | ╌ | ✔ | LEXAN REAR WING | ||
323512 | ╌ | ✔ | LEXAN FRONT WING | ||
323550 | ╌ | ✔ | COMPOSITE REAR SHOCK TOWER ADJUSTING SHIM | ||
324012 | ╌ | ✔ | ALU FRONT-MID MOTOR (3 GEARS) PLATE - SWISS 7075 T6 (3MM) | ||
324020 | ╌ | ✔ | COMPOSITE MOUNT FOR UPPER BRACE | ||
324040 | ╌ | ✔ | COMPOSITE MOTOR UPPER BRACE - CARPET EDITION | ||
324051 | ╌ | ✔ | COMPOSITE GEAR COVER - FRONT MOTOR POSITION | ||
324110 | ╌ | ✔ | ALU TOP SHAFT 20T - SWISS 7075 T6 - HARD COATED | ||
324120 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH PLATE - HARD COATED | ||
324121 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - HARD COATED | ||
324190 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH SHIM | ||
324236 | ╌ | ✔ | COMPOSITE GEAR 36T - GRAPHITE | ||
324901 | ╌ | ✔ | GEAR DIFFERENTIAL FOR 2.5MM PIN - SET | ||
324910 | ╌ | ✔ | COMPOSITE GEAR DIFFERENTIAL COVER | ||
324961 | ╌ | ✔ | GEAR DIFF OUTDRIVE ADAPTER FOR 2.5MM PIN - HUDY SPRING STEEL™ (2) | ||
324990 | ╌ | ✔ | DIFF GASKET (4) | ||
325240 | ╌ | ✔ | FRONT DRIVE AXLE - HUDY SPRING STEEL™ | ||
325323 | ╌ | ✔ | REAR DRIVE SHAFT 71MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
325341 | ╌ | ✔ | REAR ADJUSTABLE DRIVE AXLE LB - HUDY SPRING STEEL™ | ||
325390 | ╌ | ✔ | ALU SHIM 10X12X2MM (2) | ||
326111 | ╌ | ✔ | COMPOSITE BATTERY STRAP - CARPET EDITION | ||
326160 | ╌ | ✔ | ALU BATTERY HOLDER NUT (2) | ||
326161 | ╌ | ✔ | FOAM SPACER FOR BATTERY | ||
326162 | ╌ | ✔ | SELF-ADHESIVE FOAM 1.5X6.5X87MM (2) | ||
327210 | ╌ | ✔ | FRONT SUSPENSION PIVOT PIN (2) | ||
327220 | ╌ | ✔ | FRONT ARM PIVOT PIN (2) | ||
327320 | ╌ | ✔ | REAR ARM PIVOT PIN (2) | ||
329000 | ╌ | ✔ | XB2 SET OF HIGH-SPEED BALL-BEARINGS (24) | ||
329300 | ╌ | ✔ | XB2 MOUNTING HARDWARE PACKAGE - SET | ||
329707 | ╌ | ✔ | BODY FOR 1/10 2WD OFF-ROAD BUGGY 0.75MM - HIGH TRACTION | ||
329910 | ╌ | ✔ | 2WD FRONT WHEEL AERODISK WITH 12MM HEX - WHITE (2) | ||
329913 | ╌ | ✔ | 2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX - V2 - WHITE (2) | ||
352460 | ╌ | ✔ | PIVOT BALL 5.8 (10) | ||
356200 | ╌ | ✔ | BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET | ||
357330 | ╌ | ✔ | REAR LOWER OUTER PIVOT PIN (2) | ||
359050 | ╌ | ✔ | BALL-BEARING 5X10X4 STEEL SEALED - GREASE - V2 (2) | ||
361320 | ╌ | ✔ | BODY MOUNT, BATTERY MOUNT - V2 & WING SHIM (2) | ||
362280 | ╌ | ✔ | ALU CONICAL SHIM 3X6X2.0MM (10) | ||
362290 | ╌ | ✔ | STEEL STEERING BUSHING - SHORT (2) | ||
362291 | ╌ | ✔ | STEEL STEERING BUSHING - LONG (2) | ||
362315 | ╌ | ✔ | ECCENTRIC BUSHING SET (2) | ||
362316 | ╌ | ✔ | OPEN ECCENTRIC BUSHING SET (2) | ||
363240 | ╌ | ✔ | BALL UNIVERSAL 5.8MM WITH BACKSTOP (2) | ||
363520 | ╌ | ✔ | REAR WING POST - V2 (2) | ||
364131 | ╌ | ✔ | SLIPPER CLUTCH PAD „SLS“ (2) | ||
364140 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH PLATE DISC - 7075 T6 HARD COATED | ||
364180 | ╌ | ✔ | SLIPPER CLUTCH SPRING C=30 - BLACK | ||
365230 | ╌ | ✔ | DRIVE SHAFT COUPLING - HUDY SPRING STEEL™ | ||
365353 | ╌ | ✔ | ALU WHEEL HUB 12MM (2) | ||
365360 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+4.5MM“ (2) | ||
365881 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48 | ||
366202 | ╌ | ✔ | COMPOSITE SERVO MOUNT - HIGHER | ||
368010 | ╌ | ✔ | COMPOSITE SHOCK PARTS | ||
368031 | ╌ | ✔ | SHOCK PISTONS - COMPLETE SET - DELRIN | ||
368040 | ╌ | ✔ | ALU SHOCK ADJUSTABLE NUT (2) | ||
368045 | ╌ | ✔ | STEEL SCREW SHOCK PIVOT BALL WITH HEX (2) | ||
368121 | ╌ | ✔ | ALU FRONT SHOCK BODY 32MM - HARD COATED (2) | ||
368140 | ╌ | ✔ | ALU LOWER SHOCK BODY CAP (2) | ||
368161 | ╌ | ✔ | FRONT HARDENED SHOCK SHAFT 42MM (2) | ||
368193 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 3 DOTS (2) | ||
368200 | ╌ | ✔ | REAR SHOCK ABSORBERS COMPLETE SET (2) | ||
368220 | ╌ | ✔ | ALU REAR SHOCK BODY - HARD COATED (2) | ||
368260 | ╌ | ✔ | REAR HARDENED SHOCK SHAFT (2) | ||
368293 | ╌ | ✔ | REAR SPRING-SET L=57MM - 3 DOTS (2) | ||
293561-O | ╌ | ✔ | HUDY ALU REAR WING SHIM - ORANGE (2) | ||
296510-B | ╌ | ✔ | ALU COUNTERSUNK SHIM - BLUE (10) | ||
296510-O | ╌ | ✔ | ALU COUNTERSUNK SHIM - ORANGE (10) | ||
296510-V | ╌ | ✔ | ALU COUNTERSUNK SHIM - VIOLET (10) | ||
303126-K | ╌ | ✔ | ALU SHIM 3X6X5.0MM - BLACK (10) | ||
303140-O | ╌ | ✔ | ALU SHIM 3X5X2.0MM - ORANGE (10) | ||
303141-O | ╌ | ✔ | ALU SHIM 3X5X1.0MM - ORANGE (10) | ||
303142-O | ╌ | ✔ | ALU SHIM 3X5X0.5MM - ORANGE (10) | ||
303144-O | ╌ | ✔ | ALU SHIM 3X5X4.0MM - ORANGE (10) | ||
303431-K | ╌ | ✔ | ALU 4.9MM BALL END - BLACK (2) | ||
321160-M | ╌ | ✔ | COMPOSITE FRONT UPPER DECK - MEDIUM | ||
321260-H | ╌ | ✔ | COMPOSITE CHASSIS SIDE GUARDS L+R - HARD | ||
321262-M | ╌ | ✔ | COMPOSITE FRONT LOWER CHASSIS BRACE - MEDIUM | ||
321263 | ╌ | ✔ | GRAPHITE CHASSIS SIDE GUARD BRACE (2) | ||
321267 | ╌ | ✔ | GRAPHITE CHASSIS SIDE GUARD BRACE - STIFF (2) | ||
322040-M | ╌ | ✔ | COMPOSITE FRONT ROLL-CENTER HOLDER - MEDIUM | ||
322041 | ╌ | ✔ | ALU FRONT ROLL-CENTER HOLDER - SWISS 7075 T6 | ||
322080 | ╌ | ✔ | GRAPHITE SHOCK TOWER FRONT 4.0MM | ||
322110-M | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER - MEDIUM | ||
322110-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER - GRAPHITE | ||
322210-M | ╌ | ✔ | COMPOSITE C-HUB RIGHT - MEDIUM | ||
322210-G | ╌ | ✔ | COMPOSITE C-HUB RIGHT - GRAPHITE | ||
322220-M | ╌ | ✔ | COMPOSITE C-HUB LEFT - MEDIUM | ||
322220-G | ╌ | ✔ | COMPOSITE C-HUB LEFT - GRAPHITE | ||
322250-M | ╌ | ✔ | COMPOSITE STEERING BLOCK - MEDIUM | ||
322250-G | ╌ | ✔ | COMPOSITE STEERING BLOCK - GRAPHITE | ||
322290 | ╌ | ✔ | GRAPHITE EXTENSION FOR STEERING BLOCK (2) - 2 SLOTS | ||
322292 | ╌ | ✔ | GRAPHITE EXTENSION FOR STEERING BLOCK (2) - 0 SLOTS | ||
322310 | ╌ | ✔ | ALU FRONT LOWER ARM MOUNT 26° KICK-UP - SWISS 7075 T6 | ||
322312 | ╌ | ✔ | BRASS 46G FRONT LOWER ARM MOUNT 26° KICK-UP | ||
322313 | ╌ | ✔ | ALU FRONT LOWER ARM MOUNT 23°/29° KICK-UP - SWISS 7075 T6 | ||
322314 | ╌ | ✔ | BRASS 46G FRONT LOWER ARM MOUNT 23°/29° KICK-UP | ||
322510 | ╌ | ✔ | ALU STEERING ARM (2) | ||
322570 | ╌ | ✔ | ALU STEERING PLATE - SWISS 7075 T6 | ||
323015-G | ╌ | ✔ | COMPOSITE FRONT-MID MOTOR GEAR BOX (3 GEARS) - GRAPHITE - NARROW - SET | ||
323041 | ╌ | ✔ | ALU REAR ROLL-CENTER HOLDER - SWISS 7075 T6 | ||
323080 | ╌ | ✔ | GRAPHITE SHOCK TOWER REAR 3.5MM | ||
323110-M | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - MEDIUM | ||
323110-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE | ||
323120-M | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER LEFT - MEDIUM | ||
323120-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE | ||
323310 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER - FRONT - SWISS 7075 T6 (5MM) | ||
323311 | ╌ | ✔ | BRASS REAR LOWER SUSP. HOLDER - FRONT | ||
323312 | ╌ | ✔ | BRASS REAR LOWER SUSP. HOLDER - NARROW - FRONT | ||
323321 | ╌ | ✔ | BRASS REAR LOWER SUSP. HOLDER - REAR | ||
323322 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER - REAR - SWISS 7075 T6 (5MM) | ||
323323 | ╌ | ✔ | BRASS REAR LOWER SUSP. HOLDER - NARROW - REAR | ||
323325 | ╌ | ✔ | ALU REAR LONGER LOWER SUSP. HOLDER - NARROW - RR - SWISS 7075 T6 (5MM) | ||
323354-G | ╌ | ✔ | COMPOSITE UPRIGHT REAR - GRAPHITE | ||
323355 | ╌ | ✔ | ALU MULTI ADJUSTABLE REAR UPRIGHT - SWISS 7075 T6 | ||
323382 | ╌ | ✔ | ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT - 1-HOLE - SWISS 7075 T6 | ||
323511 | ╌ | ✔ | LEXAN REAR WING 1.5MM | ||
324031 | ╌ | ✔ | COMPOSITE FRONT-MID MOTOR (3 GEARS) PLATE BRACE | ||
324100 | ╌ | ✔ | SLIPPER ELIMINATOR - SET | ||
324910-G | ╌ | ✔ | COMPOSITE GEAR DIFFERENTIAL COVER - GRAPHITE | ||
325002 | ╌ | ✔ | BALL ADJUSTABLE DIFFERENTIAL FOR 2.5MM PIN - SET - HUDY SPRING STEEL™ | ||
325321 | ╌ | ✔ | REAR DRIVE SHAFT 67MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
325322 | ╌ | ✔ | REAR DRIVE SHAFT 69MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
325340 | ╌ | ✔ | REAR DRIVE AXLE LB - HUDY SPRING STEEL™ | ||
325872 | ╌ | ✔ | SLIPPER ELIMINATOR COMPOSITE SPUR GEAR 72T / 48 | ||
326110 | ╌ | ✔ | GRAPHITE BATTERY STRAP | ||
328011 | ╌ | ✔ | SHOCK BALL JOINT 21MM (2) | ||
329700 | ╌ | ✔ | BODY FOR 1/10 2WD OFF-ROAD BUGGY 0.75MM | ||
329701 | ╌ | ✔ | BODY FOR 1/10 2WD OFF-ROAD BUGGY 0.5MM - LIGHTWEIGHT | ||
329708 | ╌ | ✔ | BODY FOR 1/10 2WD OFF-ROAD BUGGY 0.5MM - HIGH TRACTION - LIGHT | ||
329900 | ╌ | ✔ | 2WD FRONT WHEEL AERODISK WITH 12MM HEX - WHITE (10) | ||
329901 | ╌ | ✔ | 2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX - V2 - WHITE (10) | ||
332660 | ╌ | ✔ | COMPOSITE STEERING & SERVO BALL JOINT 5.8 MM (4+2) | ||
335030 | ╌ | ✔ | DIFF BEVEL & SATELLITE GEARS (2+4) | ||
335080 | ╌ | ✔ | DIFF PIN (2) | ||
335081 | ╌ | ✔ | ALU DIFF PIN - HARD COATED (2) | ||
359051 | ╌ | ✔ | BALL-BEARING 5X12X4 STEEL SEALED - GREASE (2) | ||
362280-K | ╌ | ✔ | ALU CONICAL SHIM 3X6X2.0MM - BLACK (10) | ||
362280-O | ╌ | ✔ | ALU CONICAL SHIM 3X6X2.0MM - ORANGE (10) | ||
362400 | ╌ | ✔ | ANTI-ROLL BAR 1.0MM SET | ||
362470 | ╌ | ✔ | ANTI-ROLL BAR 1.0 MM | ||
362471 | ╌ | ✔ | ANTI-ROLL BAR 1.1 MM | ||
362472 | ╌ | ✔ | ANTI-ROLL BAR 1.2 MM | ||
362649 | ╌ | ✔ | BALL END 4.9MM WITH THREAD 5MM (2) | ||
362652 | ╌ | ✔ | BALL END 4.9MM WITH THREAD 10MM (2) | ||
363241 | ╌ | ✔ | BALL UNIVERSAL 5.75MM WITH BACKSTOP (2) | ||
364181 | ╌ | ✔ | SLIPPER CLUTCH SPRING C=45 - BLACK | ||
365350 | ╌ | ✔ | ALU WHEEL HUB 14MM (2) | ||
365351 | ╌ | ✔ | ALU WHEEL HUB 14MM - OFFSET „-0.75MM“ (2) | ||
365352 | ╌ | ✔ | ALU WHEEL HUB 14MM - OFFSET „+0.75MM“ (2) | ||
365354 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „-0.75MM“ (2) | ||
365355 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+0.75MM“ (2) | ||
365356 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+1.50MM“ (2) | ||
365357 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+2.25MM“ (2) | ||
365358 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+3.00MM“ (2) | ||
365359 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+3.75MM“ (2) | ||
365875 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 75T / 48 | ||
365878 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 78T / 48 | ||
365884 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 84T / 48 | ||
365887 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 87T / 48 | ||
368021 | ╌ | ✔ | ALU SHOCK SPRING RETAINING COLLAR (4) | ||
368030 | ╌ | ✔ | SHOCK PISTONS - COMPLETE SET - DELRIN | ||
368051 | ╌ | ✔ | ALU SHOCK CAP-NUT WITH VENT HOLE (2) | ||
368091 | ╌ | ✔ | RUBBER SHOCK ABSORBER SHIM FOR ALU CAP (4) | ||
368100 | ╌ | ✔ | FRONT SHOCK ABSORBERS COMPLETE SET - V2 (2) | ||
368120 | ╌ | ✔ | ALU FRONT SHOCK BODY - HARD COATED - V2 (2) | ||
368160 | ╌ | ✔ | FRONT HARDENED SHOCK SHAFT (2) | ||
368174 | ╌ | ✔ | FRONT SPRING-SET PROGRESSIVE L=45MM - 2 STRIPES (2) | ||
368175 | ╌ | ✔ | FRONT SPRING-SET PROGRESSIVE L=40MM - 3 DOTS (2) | ||
368182 | ╌ | ✔ | FRONT SPRING-SET L=45MM - 1 STRIPE & 3 DOTS (2) | ||
368183 | ╌ | ✔ | FRONT SPRING-SET L=45MM - 1 DOT (2) | ||
368184 | ╌ | ✔ | FRONT SPRING-SET L=45MM - 2 DOTS (2) | ||
368185 | ╌ | ✔ | FRONT SPRING-SET L=45MM - 3 DOTS (2) | ||
368186 | ╌ | ✔ | FRONT SPRING-SET L=45MM - 4 DOTS (2) | ||
368191 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 1 DOT (2) | ||
368192 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 2 DOTS (2) | ||
368193 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 3 DOTS (2) | ||
368194 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 4 DOTS (2) | ||
368195 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 5 DOTS (2) | ||
368273 | ╌ | ✔ | REAR SPRING-SET PROGRESSIVE L=60MM - 2 STRIPES (2) | ||
368275 | ╌ | ✔ | REAR SPRING-SET PROGRESSIVE L=55MM - 2 DOTS (2) | ||
368283 | ╌ | ✔ | REAR SPRING-SET L=63MM - 1 STRIPE & 3 DOTS (2) | ||
368284 | ╌ | ✔ | REAR SPRING-SET L=60MM - 1 DOT (2) | ||
368285 | ╌ | ✔ | REAR SPRING-SET L=60MM - 2 DOTS (2) | ||
368286 | ╌ | ✔ | REAR SPRING-SET L=60MM - 3 DOTS (2) | ||
368287 | ╌ | ✔ | REAR SPRING-SET L=60MM - 4 DOTS (2) | ||
368291 | ╌ | ✔ | REAR SPRING-SET L=57MM - 1 DOT (2) | ||
368292 | ╌ | ✔ | REAR SPRING-SET L=57MM - 2 DOTS (2) | ||
368293 | ╌ | ✔ | REAR SPRING-SET L=57MM - 3 DOTS (2) | ||
368294 | ╌ | ✔ | REAR SPRING-SET L=57MM - 4 DOTS (2) | ||
368295 | ╌ | ✔ | REAR SPRING-SET L=57MM - 5 DOTS (2) | ||
369903 | ╌ | ✔ | 4WD/2WD REAR WHEEL AERODISK WITH 12MM HEX - WHITE (10) | ||
369913 | ╌ | ✔ | 4WD/2WD REAR WHEEL AERODISK WITH 12MM HEX - WHITE (2) | ||
930508 | ╌ | ✔ | BALL-BEARING 5X8X2.5 STEEL SEALED - OIL (2) | ||
941015 | ╌ | ✔ | BALL-BEARING 10X15X4 RUBBER SEALED - OIL (2) | ||
980320-T | ╌ | ✔ | TITAN PIN 3X20 (2) | ||
302663 | ✔ | ✔ | COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) | ||
302665 | ✔ | ✔ | COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4) | ||
303123 | ✔ | ✔ | ALU SHIM 3X6X2.0MM (10) | ||
306219 | ✔ | ✔ | COMPOSITE SET OF SERVO SHIMS (4) | ||
362650 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 6MM (2) | ||
362651 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 8MM (2) | ||
296530-B | ✔ | ✔ | ALU NUT M3 - BLUE (10) | ||
296530-K | ✔ | ✔ | ALU NUT M3 - BLACK (10) | ||
296530-O | ✔ | ✔ | ALU NUT M3 - ORANGE (10) | ||
303120 | ✔ | ✔ | SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM) | ||
303121 | ✔ | ✔ | SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM) | ||
303121-K | ✔ | ✔ | ALU SHIM 3X6X0.5MM - BLACK (10) | ||
303121-O | ✔ | ✔ | ALU SHIM 3X6X0.5MM - ORANGE (10) | ||
303122 | ✔ | ✔ | ALU SHIM 3X6X1.0MM (10) | ||
303122-K | ✔ | ✔ | ALU SHIM 3X6X1.0MM - BLACK (10) | ||
303122-O | ✔ | ✔ | ALU SHIM 3X6X1.0MM - ORANGE (10) | ||
303123-K | ✔ | ✔ | ALU SHIM 3X6X2.0MM - BLACK (10) | ||
303123-O | ✔ | ✔ | ALU SHIM 3X6X2.0MM - ORANGE (10) | ||
303125 | ✔ | ✔ | ALU SHIM 3X6X3.0MM (10) | ||
303125-K | ✔ | ✔ | ALU SHIM 3X6X3.0MM - BLACK (10) | ||
372503 | ✔ | ✔ | COMPOSITE SERVO SAVER - X-STIFF - SET - V2 |