Xray X1'23 vs XB4'20
Comparing compatible parts between the Xray RC-car models X1'23 and XB4'20.
link Part # | X1'23 | XB4'20 | Description | ||
---|---|---|---|---|---|
301370 | ✔ | ╌ | X4 ALU PLATE FOR REAR GRAPHITE BODY POST HOLDER | ||
302132-M | ✔ | ╌ | X4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FR/RL | ||
302142-M | ✔ | ╌ | X4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR | ||
302310 | ✔ | ╌ | X4 ALU CASTER BUSHING FRONT 3° / REAR 0.5°/5.5° - 1 DOT (4) | ||
302311 | ✔ | ╌ | X4 ALU CASTER BUSHING FRONT 4° / REAR 1.5°/4.5° - 2 DOTS (4) | ||
302312 | ✔ | ╌ | X4 ALU CASTER BUSHING FRONT 5° / REAR 2.5°/3.5° - 3 DOTS (4) | ||
302612 | ✔ | ╌ | ALU ADJ. TURNBUCKLE M3 L/R 39 MM - SWISS 7075 T6 (2) | ||
302640 | ✔ | ╌ | X4 ADJUSTABLE CAMBER SCREW 14MM M4 L/R - HUDY SPRING STEEL™ (2) | ||
302663 | ✔ | ╌ | COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) | ||
302666 | ✔ | ╌ | X4 COMPOSITE BALL JOINT 4.9MM F+R - OPEN (2+2) | ||
303122-K | ✔ | ╌ | ALU SHIM 3X6X1.0MM - BLACK (10) | ||
303123-K | ✔ | ╌ | ALU SHIM 3X6X2.0MM - BLACK (10) | ||
303125-K | ✔ | ╌ | ALU SHIM 3X6X3.0MM - BLACK (10) | ||
303130-K | ✔ | ╌ | ALU BUSHING 3X6X9.0MM - BLACK (10) | ||
303141 | ✔ | ╌ | ALU SHIM 3X5X1.0MM (10) | ||
303232 | ✔ | ╌ | X4 UPPER ARM BALL UNIVERSAL 4.9MM - HUDY SPRING STEEL™ (2) | ||
303241 | ✔ | ╌ | PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4) | ||
306200-K | ✔ | ╌ | ALU SERVO MOUNT - BLACK (2) | ||
308037 | ✔ | ╌ | T4 COMPOSITE PISTONS 4-HOLE 1.0-1.2MM, 3-HOLE 1.0-1.2MM | ||
308042-K | ✔ | ╌ | ALU SHOCK ADJUSTABLE NUT - BLACK (2) | ||
308082 | ✔ | ╌ | T4 SHOCK ABSORBER MEMBRANE (4) | ||
308263 | ✔ | ╌ | XRAY 4S SPRING-SET PROGRESSIVE C=2.3-2.6 (2) | ||
308316 | ✔ | ╌ | SHOCK BALL JOINT - OPEN (4) | ||
308323 | ✔ | ╌ | T4 ALU SHOCK BODY (2) | ||
308327-K | ✔ | ╌ | ALU CAP FOR XRAY SHOCK BODY #308322 - BLACK (2) | ||
308333 | ✔ | ╌ | T4 COMPOSITE SHOCK PARTS | ||
308353-K | ✔ | ╌ | ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2) | ||
309400 | ✔ | ╌ | BODY CLIP (8) | ||
338586 | ✔ | ╌ | SHIM 5X7X0.5 (10) | ||
362648 | ✔ | ╌ | BALL END 4.9MM WITH THREAD 4MM (2) - (REPLACEMENT FOR #302652) | ||
371028 | ✔ | ╌ | X1‘23 GRAPHITE CHASSIS 2.5MM | ||
371059 | ✔ | ╌ | X1‘23 GRAPHITE ARM MOUNT PLATE 2.5MM - NARROW TRACK-WIDTH | ||
371069 | ✔ | ╌ | X1‘23 GRAPHITE ARM MOUNT PLATE 2.5MM - WIDE TRACK-WIDTH | ||
371082 | ✔ | ╌ | X1‘23 GRAPHITE REAR BRACE 2.5MM | ||
371096 | ✔ | ╌ | X1 GRAPHITE PLATE FOR MOUNTS 2.5MM | ||
371163 | ✔ | ╌ | X1‘21/23 GRAPHITE REAR POD LOWER PLATE 2.5MM | ||
371184-K | ✔ | ╌ | ALU POD LINK GRAPHITE PLATE HOLDER - BLACK | ||
371185 | ✔ | ╌ | X1‘20/21/23 GRAPHITE POD LINK PLATE 2.5MM (2) | ||
371190 | ✔ | ╌ | COMPOSITE POD LINK (2) | ||
371201 | ✔ | ╌ | X1 COMPOSITE FRONT BUMPER | ||
371250 | ✔ | ╌ | X1 SPOILER LOW & HIGH DOWNFORCE (2) | ||
371290-K | ✔ | ╌ | X1 ALU BODY POST PLATE - BLACK | ||
371320 | ✔ | ╌ | COMPOSITE BODY POST (2) | ||
372070 | ✔ | ╌ | COMPOSITE RIDE HEIGHT ADJUSTER SET - V2 (2) | ||
372092 | ✔ | ╌ | X1‘23 GRAPHITE FRONT ARM BRACE 2.2MM | ||
372127 | ✔ | ╌ | X1‘21 GRAPHITE LOWER SUSPENSION ARM 2.5MM | ||
372177 | ✔ | ╌ | SPRING 4.75 COILS 3.6X6X0.45MM; C=2.0 - SILVER (SOFT) (2) | ||
372213 | ✔ | ╌ | X1 COMPOSITE STEERING BLOCK - 3-HOLE & BACKSTOPS | ||
372286 | ✔ | ╌ | X1‘21 KING PIN (2) | ||
372290 | ✔ | ╌ | ALU SHIM 3.2X4.8X0.5 (4) | ||
372320 | ✔ | ╌ | X1 COMPOSITE ARM BUSHING (4) | ||
372503 | ✔ | ╌ | COMPOSITE SERVO SAVER - X-STIFF - SET - V2 | ||
372540 | ✔ | ╌ | X1 COMPOSITE STEERING ARM | ||
372650 | ✔ | ╌ | BALL END 4.2MM WITH 6MM THREAD (2) | ||
372662 | ✔ | ╌ | COMPOSITE BALL JOINT 4.2 MM (4) | ||
373018 | ✔ | ╌ | X1‘21/23 ALU REAR BULKHEAD - MOTOR - RIGHT | ||
373028 | ✔ | ╌ | X1‘21/23 ALU REAR BULKHEAD - LEFT | ||
373050 | ✔ | ╌ | X1‘20/21/23 GRAPHITE REAR BULKHEAD BRACE 2.0MM | ||
373051 | ✔ | ╌ | X1‘20/21/23 GRAPHITE REAR WING MOUNT 2.5MM | ||
373073-K | ✔ | ╌ | ALU REAR BRACE MOUNT 13MM - BLACK (2) | ||
373075 | ✔ | ╌ | ALU REAR BRACE MOUNT 10.5MM - BLACK (2) | ||
373095 | ✔ | ╌ | ALU CHASSIS PIVOT HOLDER - SWISS 7075 T6 | ||
373096 | ✔ | ╌ | ALU POD PLATE PIVOT HOLDER - SWISS 7075 T6 | ||
373097 | ✔ | ╌ | COMPOSITE PIVOT BRACE BUSHING | ||
373242 | ✔ | ╌ | COMPOSITE PIVOTBALL UNIVERSAL 6.0 MM - SHORT (2) | ||
373245 | ✔ | ╌ | X1 UPPER ARM BALL UNIVERSAL 4.9MM - HUDY SPRING STEEL™ (2) | ||
373514-K | ✔ | ╌ | X1 COMPOSITE REAR WING - LIGHTWEIGHT & WIDE - BLACK | ||
373526 | ✔ | ╌ | X1‘23 GRAPHITE REAR WING HOLDER SIDE PLATE 2.5MM (L+R) | ||
373554 | ✔ | ╌ | X1‘21/23 REAR POD UPPER PLATE - GRAPHITE 2.5MM | ||
373585 | ✔ | ╌ | SIDE SPRING C=0.9 - GOLD (2) | ||
373591 | ✔ | ╌ | COMPOSITE SIDE SPRING HOLDER (2) | ||
375012 | ✔ | ╌ | STEEL REAR AXLE SHAFT - HUDY SPRING STEEL™ | ||
375026 | ✔ | ╌ | X1 ALU REAR DRIVE AXLE - RIGHT | ||
375036 | ✔ | ╌ | X1 ALU REAR WHEEL HUB - RIGHT | ||
375046 | ✔ | ╌ | X1 ALU REAR WHEEL HUB - LEFT | ||
375050 | ✔ | ╌ | ALU DIFF HUB | ||
375080 | ✔ | ╌ | D-LOCK DIFF PLATE (2) | ||
375090 | ✔ | ╌ | SET OF ALU SHIMS 6.37X8.4MM (0.5MM, 1.0MM, 2.0MM) | ||
375221 | ✔ | ╌ | X1 FRONT WHEEL AXLE - HUDY SPRING STEEL™ (2) | ||
375221 | ✔ | ╌ | X1 FRONT WHEEL AXLE - HUDY SPRING STEEL™ (2) | ||
375896 | ✔ | ╌ | COMPOSITE SPUR GEAR - 96T / 64P | ||
376132 | ✔ | ╌ | GRAPHITE BATTERY BACKSTOP 3.0MM - MIDDLE | ||
376150 | ✔ | ╌ | X12‘22 GRAPHITE ADJUSTABLE BATTERY HOLDER 1.6MM (2) | ||
376170 | ✔ | ╌ | X12‘22 GRAPHITE BATTERY CLAMP 2.2MM (2) | ||
376235 | ✔ | ╌ | X1‘23 GRAPHITE TOP DECK 2.2MM | ||
376264 | ✔ | ╌ | X1‘23 ALU FRONT TOP DECK MOUNT - SWISS 7075 T6 | ||
376290 | ✔ | ╌ | LOW PROFILE ALU SELF-LOCKING NUT (2) | ||
376328 | ✔ | ╌ | X1‘23 SIDE BRACE - GRAPHITE 2.5MM - RIGHT & LEFT | ||
376361-K | ✔ | ╌ | ALU MOUNT 26.5MM - BLACK (2) | ||
376364-K | ✔ | ╌ | ALU MOUNT 10.8MM - BLACK (2) | ||
378062 | ✔ | ╌ | X1 SHOCK SHAFT | ||
378072-K | ✔ | ╌ | X1 ALU SHOCK SPRING COLLAR - BLACK | ||
378141 | ✔ | ╌ | SIDE TUBE (2) | ||
378153 | ✔ | ╌ | COMPOSITE SIDE TUBE SHAFT (2) | ||
379001 | ✔ | ╌ | X1 BALL-BEARING SET | ||
379300 | ✔ | ╌ | MOUNTING HARDWARE PACKAGE FOR XII - SET | ||
302612-O | ✔ | ╌ | ALU ADJ. TURNBUCKLE M3 L/R 39 MM - ORANGE - SWISS 7075 T6 (2) | ||
303118-K | ✔ | ╌ | ALU SHIM 3X9X1.0MM - BLACK (10) | ||
303119-K | ✔ | ╌ | ALU SHIM 3X9X2.0MM - BLACK (10) | ||
303120 | ✔ | ╌ | SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM) | ||
303121 | ✔ | ╌ | SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM) | ||
303121-K | ✔ | ╌ | ALU SHIM 3X6X0.5MM - BLACK (10) | ||
303121-O | ✔ | ╌ | ALU SHIM 3X6X0.5MM - ORANGE (10) | ||
303122 | ✔ | ╌ | ALU SHIM 3X6X1.0MM (10) | ||
303122-O | ✔ | ╌ | ALU SHIM 3X6X1.0MM - ORANGE (10) | ||
303123-O | ✔ | ╌ | ALU SHIM 3X6X2.0MM - ORANGE (10) | ||
303125 | ✔ | ╌ | ALU SHIM 3X6X3.0MM (10) | ||
303125-O | ✔ | ╌ | ALU SHIM 3X6X3.0MM - ORANGE (10) | ||
303126 | ✔ | ╌ | ALU SHIM 3X6X5.0MM (10) | ||
303126-K | ✔ | ╌ | ALU SHIM 3X6X5.0MM - BLACK (10) | ||
303127 | ✔ | ╌ | ALU SHIM 3X6X4.0MM (10) | ||
303128 | ✔ | ╌ | ALU SHIM 3X6X6.0MM (10) | ||
303128-K | ✔ | ╌ | ALU SHIM 3X6X6.0MM - BLACK (10) | ||
303130-O | ✔ | ╌ | ALU SHIM 3X6X9.0MM - ORANGE (10) | ||
303136 | ✔ | ╌ | ALU SHIM 3X7X1.0MM (10) | ||
303136-O | ✔ | ╌ | ALU SHIM 3X7X1.0MM - ORANGE (10) | ||
303137-K | ✔ | ╌ | ALU SHIM 3X7.5X2.0MM - BLACK (10) | ||
303138-O | ✔ | ╌ | ALU SHIM 3X7X2.0MM - ORANGE (10) | ||
303138-K | ✔ | ╌ | ALU SHIM 3X7X2.0MM - BLACK (10) | ||
303139-K | ✔ | ╌ | ALU SHIM 3X6X7.0MM - BLACK (10) | ||
303140-O | ✔ | ╌ | ALU SHIM 3X5X2.0MM - ORANGE (10) | ||
303141-O | ✔ | ╌ | ALU SHIM 3X5X1.0MM - ORANGE (10) | ||
303142-O | ✔ | ╌ | ALU SHIM 3X5X0.5MM - ORANGE (10) | ||
303143 | ✔ | ╌ | ALU SHIM 3X5X0.25MM (10) | ||
304981 | ✔ | ╌ | COMPOSITE GEAR DIFF CROSS PIN WITH HOLE | ||
306200-O | ✔ | ╌ | ALU SERVO MOUNT - ORANGE (2) | ||
308042-O | ✔ | ╌ | ALU SHOCK ADJUSTABLE NUT - ORANGE (2) | ||
308092 | ✔ | ╌ | T4 SHOCK FOAM INSERT (4) | ||
308264 | ✔ | ╌ | XRAY 4S SPRING-SET PROGRESSIVE C=2.5-2.8 (2) | ||
308274 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.3 (2) | ||
308275 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.5 (2) | ||
308276 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.7 (2) | ||
308277 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.9 (2) | ||
308286 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.6 (2) | ||
308288 | ✔ | ╌ | XRAY 4S SPRING-SET C=2.8 (2) | ||
308290 | ✔ | ╌ | XRAY 4S SPRING-SET C=3.0 (2) | ||
308327-O | ✔ | ╌ | ALU CAP FOR XRAY SHOCK BODY #308322 - ORANGE (2) | ||
308353-O | ✔ | ╌ | ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2) | ||
338584 | ✔ | ╌ | SHIM 5X7X0.2 (10) | ||
338585 | ✔ | ╌ | SHIM 5X7X0.3 (10) | ||
362649 | ✔ | ╌ | BALL END 4.9MM WITH THREAD 5MM (2) | ||
371184 | ✔ | ╌ | ALU POD LINK GRAPHITE PLATE HOLDER - ORANGE | ||
371202 | ✔ | ╌ | X1 COMPOSITE FRONT WING - BLACK - ETS APPROVED | ||
371203 | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE FRONT WING - WHITE - ETS APPROVED | ||
371203-K | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE FRONT WING - BLACK - ETS APPROVED | ||
371204 | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE FRONT WING - WHITE - FLAT DESIGN | ||
371204-K | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE FRONT WING - BLACK - FLAT DESIGN | ||
371290 | ✔ | ╌ | X1 ALU BODY POST PLATE - ORANGE | ||
372176 | ✔ | ╌ | SPRING 4.25 COILS 3.6X6X0.4MM; C=1.5 - GOLD (SOFT) (2) | ||
372178 | ✔ | ╌ | SPRING 4.05 COILS 3.6X6X0.45MM; C=2.5 - BLACK (SOFT) (2) | ||
372179 | ✔ | ╌ | SPRING 4.25 COILS 3.6X6X0.5MM; C=3.0 - GREY (SOFT) (2) | ||
372180 | ✔ | ╌ | SPRING 4.0 COILS 3.6X6X0.5MM; C=3.5 - GOLD (2) | ||
372181 | ✔ | ╌ | SPRING 4.75 COILS 3.6X6X0.55MM; C=4.0 - SILVER (2) | ||
372182 | ✔ | ╌ | SPRING 4.0 COILS 3.6X6X0.55MM; C=5.0 - BLACK (2) | ||
372183 | ✔ | ╌ | SPRING 4.25 COILS 3.6X6X0.6MM; C=6.0 - GREY (2) | ||
372541-K | ✔ | ╌ | X1 ALU ADJUSTABLE SERVO SAVER SET - BLACK | ||
372649 | ✔ | ╌ | BALL END 4.2MM WITH 4MM THREAD (2) | ||
372653 | ✔ | ╌ | BALL END 4.2MM WITH 8MM THREAD (2) | ||
373073-O | ✔ | ╌ | ALU REAR BRACE MOUNT 13MM - ORANGE (2) | ||
373512-K | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE REAR WING - BLACK | ||
373513-K | ✔ | ╌ | X1 COMPOSITE ADJUSTABLE REAR WING - BLACK - ETS APPROVED | ||
373514 | ✔ | ╌ | X1 COMPOSITE REAR WING - LIGHTWEIGHT & WIDE - WHITE | ||
373584 | ✔ | ╌ | SIDE SPRING C=0.6 - SILVER (2) | ||
373586 | ✔ | ╌ | SIDE SPRING C=1.2 - BLACK (2) | ||
373587 | ✔ | ╌ | SIDE SPRING C=1.5 - SILVER (MEDIUM) (2) | ||
373588 | ✔ | ╌ | SIDE SPRING C=1.8 - GOLD (MEDIUM) (2) | ||
374901 | ✔ | ╌ | XRAY GEAR DIFFERENTIAL 1/10 FORMULA - SET - V2 | ||
374920 | ✔ | ╌ | COMPOSITE GEAR DIFFERENTIAL COVER - GRAPHITE | ||
374930 | ✔ | ╌ | COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) | ||
374970 | ✔ | ╌ | ALU GEAR DIFFERENTIAL SHAFT - SWISS 7075 T6 | ||
374990 | ✔ | ╌ | GEAR DIFF GASKET (4) | ||
375001 | ✔ | ╌ | XRAY SOLID AXLE 1/10 FORMULA - SET | ||
375010 | ✔ | ╌ | REAR AXLE SHAFT - GRAPHITE - V3 | ||
375014 | ✔ | ╌ | GRAPHITE REAR GEAR DIFF AXLE SHAFT | ||
375017 | ✔ | ╌ | REAR GEAR DIFF AXLE SHAFT - HUDY SPRING STEEL™ | ||
375037 | ✔ | ╌ | X1 ALU REAR WHEEL HUB FOR GEAR DIFF - RIGHT | ||
375050-O | ✔ | ╌ | ALU DIFF HUB - ORANGE | ||
375090-O | ✔ | ╌ | SET OF ALU SHIMS 6.37X8.4MM (0.5MM, 1.0MM, 2.0MM) - ORANGE | ||
375093 | ✔ | ╌ | ALU SHIM 6.37X8.4X6.0MM (2) | ||
375093-O | ✔ | ╌ | ALU SHIM 6.37X8.4X6.0MM - ORANGE (2) | ||
375776 | ✔ | ╌ | COMPOSITE GEAR DIFF SPUR GEAR - 76T / 64P | ||
375780 | ✔ | ╌ | COMPOSITE GEAR DIFF SPUR GEAR - 80T / 64P | ||
375784 | ✔ | ╌ | COMPOSITE GEAR DIFF SPUR GEAR - 84T / 64P | ||
375788 | ✔ | ╌ | COMPOSITE GEAR DIFF SPUR GEAR - 88T / 64P | ||
375792 | ✔ | ╌ | COMPOSITE GEAR DIFF SPUR GEAR - 92T / 64P | ||
375872 | ✔ | ╌ | COMPOSITE SPUR GEAR - 72T / 64P | ||
375875 | ✔ | ╌ | COMPOSITE SPUR GEAR - 75T / 64P | ||
375876 | ✔ | ╌ | COMPOSITE SPUR GEAR - 76T / 64P | ||
375878 | ✔ | ╌ | COMPOSITE SPUR GEAR - 78T / 64P | ||
375880 | ✔ | ╌ | COMPOSITE SPUR GEAR - 80T / 64P | ||
375884 | ✔ | ╌ | COMPOSITE SPUR GEAR - 84T / 64P | ||
375888 | ✔ | ╌ | COMPOSITE SPUR GEAR - 88T / 64P | ||
375892 | ✔ | ╌ | COMPOSITE SPUR GEAR - 92T / 64P | ||
376361-O | ✔ | ╌ | ALU MOUNT 26.5MM - ORANGE (2) | ||
376364-O | ✔ | ╌ | ALU MOUNT 10.8MM - ORANGE (2) | ||
378072-O | ✔ | ╌ | X1 ALU SHOCK SPRING COLLAR - ORANGE | ||
378100 | ✔ | ╌ | SIDE SHOCK ABSORBER SET | ||
379701 | ✔ | ╌ | XRAY X1 1/10 FORMULA BODY | ||
379702 | ✔ | ╌ | XRAY X1 1/10 FORMULA BODY – WORLD CHAMPION EDITION | ||
930230 | ✔ | ╌ | CERAMIC BALL 3.175MM (12) | ||
930238 | ✔ | ╌ | CERAMIC BALL-BEARING AXIAL F3-8 3X8X3.5 | ||
931438 | ✔ | ╌ | BALL-BEARING 1/4“X3/8“X1/8“ STEEL SEALED - OIL (2) | ||
960031 | ✔ | ╌ | ALU NUT M3 (10) | ||
106053 | ╌ | ✔ | HUDY SET OF REPLACEMENT DRIVE SHAFT PINS 2.5X10 (10) | ||
303431-K | ╌ | ✔ | ALU 4.9MM BALL END - BLACK (2) | ||
303454 | ╌ | ✔ | BALL JOINT 4.9MM - OPEN (4) | ||
304932 | ╌ | ✔ | GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW | ||
304980 | ╌ | ✔ | COMPOSITE GEAR DIFF CROSS PIN | ||
304990 | ╌ | ✔ | DIFF GASKET (4) | ||
306208 | ╌ | ✔ | ALU SERVO MOUNT - BOTH SIDES THREADED | ||
309402 | ╌ | ✔ | BODY CLIP FOR 6MM BODY POST (4) | ||
322610 | ╌ | ✔ | ADJ. TURNBUCKLE 55MM M3 L/R - HUDY SPRING STEEL™ (2) | ||
323354-H | ╌ | ✔ | COMPOSITE UPRIGHT REAR - HARD | ||
323382 | ╌ | ✔ | ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT 1-HOLE - SWISS 7075 T6 | ||
325324 | ╌ | ✔ | REAR DRIVE SHAFT 75MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
325340 | ╌ | ✔ | REAR DRIVE AXLE LB - HUDY SPRING STEEL™ | ||
327210 | ╌ | ✔ | FRONT SUSPENSION PIVOT PIN (2) | ||
329913 | ╌ | ✔ | 2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX - V2 - WHITE (2) | ||
332540 | ╌ | ✔ | ALU SERVO SAVER ADJUSTABLE NUT | ||
332561 | ╌ | ✔ | SERVO SAVER SPRING C=14 | ||
352460 | ╌ | ✔ | PIVOT BALL 5.8 (10) | ||
352610 | ╌ | ✔ | ADJ. TURNBUCKLE M3 L/R 45 MM - SPRING STEEL - V3 (2) | ||
356200 | ╌ | ✔ | BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET | ||
359050 | ╌ | ✔ | BALL-BEARING 5X10X4 STEEL SEALED - GREASE - V2 (2) | ||
361107 | ╌ | ✔ | XB4‘20 ALU CHASSIS - SWISS 7075 T6 (2MM) | ||
361176 | ╌ | ✔ | XB4‘20 GRAPHITE CENTER UPPER DECK 2MM | ||
361178 | ╌ | ✔ | GRAPHITE CHASSIS BRACE UPPER DECK 2.0MM | ||
361182 | ╌ | ✔ | COMPOSITE REAR LOWER BRACE | ||
361188 | ╌ | ✔ | XB4‘20 GRAPHITE REAR UPPER BRACE 2MM | ||
361201 | ╌ | ✔ | COMPOSITE FRONT BUMPER - ONE HOLE | ||
361269-H | ╌ | ✔ | COMPOSITE CHASSIS SIDE GUARDS L+R - HARD | ||
361280 | ╌ | ✔ | XB4‘20 GRAPHITE REAR CHASSIS PLATE 2MM - NARROW | ||
361296 | ╌ | ✔ | COMPOSITE CHASSIS BRACE FRONT - HARD | ||
361297 | ╌ | ✔ | COMPOSITE CHASSIS BRACE REAR - HARD | ||
361298 | ╌ | ✔ | GRAPHITE CHASSIS WIRE COVER 2.0MM - V2 | ||
361320 | ╌ | ✔ | BODY MOUNT, BATTERY MOUNT - V2 & WING SHIM (2) | ||
361322 | ╌ | ✔ | BODY MOUNT - EXTRA-SHORT | ||
362004 | ╌ | ✔ | DIFF BULKHEAD BLOCK SET FRONT - NARROW | ||
362005 | ╌ | ✔ | DIFF BULKHEAD BLOCK SET REAR - NARROW | ||
362083 | ╌ | ✔ | GRAPHITE SHOCK TOWER FRONT 3.5MM - LOWER | ||
362112-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER - HARD | ||
362210-H | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. RIGHT - HARD | ||
362220-H | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. LEFT - HARD | ||
362250-H | ╌ | ✔ | COMPOSITE STEERING BLOCK - HARD | ||
362280 | ╌ | ✔ | ALU CONICAL SHIM 3X6X2.0MM (10) | ||
362290 | ╌ | ✔ | STEEL STEERING BUSHING - SHORT (2) | ||
362291 | ╌ | ✔ | STEEL STEERING BUSHING - LONG (2) | ||
362312 | ╌ | ✔ | ALU FRONT LOWER SUSP. HOLDER - NARROW - FRONT - 7075 T6 | ||
362315 | ╌ | ✔ | ECCENTRIC BUSHING SET (2) | ||
362316 | ╌ | ✔ | OPEN ECCENTRIC BUSHING SET (2) | ||
362322 | ╌ | ✔ | ALU FRONT LOWER SUSP. HOLDER - NARROW - REAR - 7075 T6 | ||
362400 | ╌ | ✔ | ANTI-ROLL BAR 1.0MM SET | ||
362478 | ╌ | ✔ | ANTI-ROLL BAR 1.8 MM | ||
362510 | ╌ | ✔ | COMPOSITE SERVO SAVER | ||
362540 | ╌ | ✔ | ALU SERVO SAVER MAIN SHAFT | ||
362551 | ╌ | ✔ | SERVO SAVER PIVOT SHAFT +2MM (2) | ||
362571 | ╌ | ✔ | COMPOSITE STEERING PLATE | ||
362581 | ╌ | ✔ | STEERING BRACE 2.0MM GRAPHITE | ||
362610 | ╌ | ✔ | ADJUSTABLE TURNBUCKLE 50MM M3 L/R - HUDY SPRING STEEL™ (2) | ||
363081 | ╌ | ✔ | GRAPHITE SHOCK TOWER REAR 3.0MM - V2 | ||
363112-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD | ||
363122-H | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD | ||
305231 | ╌ | ✔ | DRIVE SHAFT COUPLING - HUDY SPRING STEEL | ||
323354-G | ╌ | ✔ | COMPOSITE UPRIGHT REAR - GRAPHITE | ||
323355 | ╌ | ✔ | ALU MULTI ADJUSTABLE REAR UPRIGHT - SWISS 7075 T6 | ||
323381 | ╌ | ✔ | ALU REAR HUB PLATE FOR MULTI ADJUSTABLE UPRIGHT - SWISS 7075 T6 | ||
325341 | ╌ | ✔ | REAR ADJUSTABLE DRIVE AXLE LB - HUDY SPRING STEEL™ | ||
329901 | ╌ | ✔ | 2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX - V2 - WHITE (10) | ||
335030 | ╌ | ✔ | DIFF BEVEL & SATELLITE GEARS (2+4) | ||
361174 | ╌ | ✔ | GRAPHITE FRONT UPPER STEERING DECK 2.0MM | ||
362085 | ╌ | ✔ | ALU SHOCK TOWER FRONT 3.0MM - SWISS 7075 T6 | ||
362112 | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER | ||
362112-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM FRONT LOWER - GRAPHITE | ||
362210 | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. RIGHT | ||
362210-G | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. RIGHT - GRAPHITE | ||
362211 | ╌ | ✔ | COMPOSITE C-HUB 6° DEG. RIGHT | ||
362220 | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. LEFT | ||
362220-G | ╌ | ✔ | COMPOSITE C-HUB 9° DEG. LEFT - GRAPHITE | ||
362221 | ╌ | ✔ | COMPOSITE C-HUB 6° DEG. LEFT | ||
362234 | ╌ | ✔ | ALU C-HUB 12° RIGHT | ||
362244 | ╌ | ✔ | ALU C-HUB 12° LEFT | ||
362250 | ╌ | ✔ | COMPOSITE STEERING BLOCK | ||
362250-G | ╌ | ✔ | COMPOSITE STEERING BLOCK - GRAPHITE | ||
362470 | ╌ | ✔ | ANTI-ROLL BAR 1.0 MM | ||
362471 | ╌ | ✔ | ANTI-ROLL BAR 1.1 MM | ||
362472 | ╌ | ✔ | ANTI-ROLL BAR 1.2 MM | ||
362473 | ╌ | ✔ | ANTI-ROLL BAR 1.3 MM | ||
362474 | ╌ | ✔ | ANTI-ROLL BAR 1.4 MM | ||
362476 | ╌ | ✔ | ANTI-ROLL BAR 1.6 MM | ||
362480 | ╌ | ✔ | ANTI-ROLL BAR 2.0 MM | ||
362510-G | ╌ | ✔ | COMPOSITE SERVO SAVER - GRAPHITE | ||
362571-G | ╌ | ✔ | COMPOSITE STEERING PLATE - GRAPHITE | ||
362574 | ╌ | ✔ | ALU STEERING PLATE 2-HOLE | ||
363084 | ╌ | ✔ | ALU SHOCK TOWER REAR 3.0MM - SWISS 7075 T6 | ||
363240 | ╌ | ✔ | BALL UNIVERSAL 5.8MM WITH BACKSTOP (2) | ||
363112-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE | ||
363122-G | ╌ | ✔ | COMPOSITE SUSPENSION ARM REAR LOWER LEFT - GRAPHITE | ||
363314 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER 3° - NARROW - FRONT - 7075 T6 | ||
363315 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER 1° - NARROW - FRONT - 7075 T6 | ||
363324 | ╌ | ✔ | ALU REAR LOWER SUSP. HOLDER - NARROW - REAR - 7075 T6 | ||
363510 | ╌ | ✔ | LEXAN REAR WING (2) | ||
363520 | ╌ | ✔ | REAR WING POST - V2 (2) | ||
364013 | ╌ | ✔ | ALU MOTOR BULKHEAD - LOW | ||
364023 | ╌ | ✔ | COMPOSITE CENTRAL BULKHEAD - LOW | ||
364024 | ╌ | ✔ | ALU CENTRAL BULKHEAD - LOW | ||
364090 | ╌ | ✔ | ALU ECCENTRIC MOTOR BULKHEAD INSERT - V3 | ||
364113 | ╌ | ✔ | 3-PAD SLIPPER CLUTCH SHAFT - NARROW - HUDY SPRING STEEL™ | ||
364120 | ╌ | ✔ | ALU SLIPPER CLUTCH PLATE - 7075 T6 HARD COATED - LIGHTWEIGHT | ||
364121 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - 7075 T6 HARD COATED | ||
364131 | ╌ | ✔ | SLIPPER CLUTCH PAD „SLS“ (2) | ||
364140 | ╌ | ✔ | ALU 3-PAD SLIPPER CLUTCH PLATE DISC - 7075 T6 HARD COATED | ||
364172 | ╌ | ✔ | SLIPPER CLUTCH OUTDRIVE ADAPTER - NARROW - HUDY SPRING STEEL™ | ||
364180 | ╌ | ✔ | SLIPPER CLUTCH SPRING C=30 - BLACK | ||
364181 | ╌ | ✔ | SLIPPER CLUTCH SPRING C=45 - BLACK | ||
364182 | ╌ | ✔ | SLIPPER CLUTCH SPRING C=46 - BLACK | ||
364190 | ╌ | ✔ | ALU SLIPPER CLUTCH NUT - V2 | ||
364903 | ╌ | ✔ | GEAR DIFFERENTIAL - LARGE VOLUME - SET | ||
364904 | ╌ | ✔ | GEAR CENTER DIFFERENTIAL - LARGE VOLUME - SET | ||
364920 | ╌ | ✔ | COMPOSITE GEAR DIFFERENTIAL COVER - LARGE VOLUME | ||
364940 | ╌ | ✔ | STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 40T | ||
364962 | ╌ | ✔ | GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) | ||
364920-G | ╌ | ✔ | COMPOSITE GEAR DIFFERENTIAL COVER - LARGE VOLUME - GRAPHITE | ||
364978 | ╌ | ✔ | COMPOSITE CENTER DIFF SPUR GEAR 78T / 48 | ||
364981 | ╌ | ✔ | COMPOSITE CENTER DIFF SPUR GEAR 81T / 48 | ||
364984 | ╌ | ✔ | COMPOSITE CENTER DIFF SPUR GEAR 84T / 48 | ||
365126 | ╌ | ✔ | STEEL BEVEL DRIVE GEAR - CNC-MACHINED - 16T | ||
365201 | ╌ | ✔ | ECS FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDY SPRING STEEL™ - SET | ||
365225 | ╌ | ✔ | FRONT DRIVE SHAFT 83MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
365230 | ╌ | ✔ | DRIVE SHAFT COUPLING - HUDY SPRING STEEL™ | ||
365240 | ╌ | ✔ | FRONT DRIVE AXLE - HUDY SPRING STEEL™ | ||
365350 | ╌ | ✔ | ALU WHEEL HUB 14MM (2) | ||
365351 | ╌ | ✔ | ALU WHEEL HUB 14MM - OFFSET „-0.75MM“ (2) | ||
365352 | ╌ | ✔ | ALU WHEEL HUB 14MM - OFFSET „+0.75MM“ (2) | ||
365353 | ╌ | ✔ | ALU WHEEL HUB 12MM - V2 (2) | ||
365354 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „-0.75MM“ (2) | ||
365355 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+0.75MM“ (2) | ||
365356 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+1.50MM“ (2) | ||
365357 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+2.25MM“ (2) | ||
365358 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+3.00MM“ (2) | ||
365359 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+3.75MM“ (2) | ||
365360 | ╌ | ✔ | ALU WHEEL HUB 12MM - OFFSET „+4.5MM“ (2) | ||
365430 | ╌ | ✔ | CENTRAL DRIVE SHAFT 108MM WITH 2.5MM PIN - HUDY SPRING STEEL™ | ||
365442 | ╌ | ✔ | CENTRAL SHAFT UNIVERSAL JOINT FOR MACHINED PINION | ||
365470 | ╌ | ✔ | COMPOSITE DRIVE SHAFT SAFETY COLLAR - V2 (3) | ||
365471-K | ╌ | ✔ | ALU DRIVE SHAFT SAFETY COLLAR - BLACK (3) | ||
365471-O | ╌ | ✔ | ALU DRIVE SHAFT SAFETY COLLAR - ORANGE (3) | ||
365875 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 75T / 48 | ||
365878 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 78T / 48 | ||
365881 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48 | ||
365884 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 84T / 48 | ||
365887 | ╌ | ✔ | COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 87T / 48 | ||
366050 | ╌ | ✔ | COMPOSITE RADIO PLATE - V2 | ||
366114 | ╌ | ✔ | COMPOSITE BATTERY STRAP - LONG | ||
366115 | ╌ | ✔ | COMPOSITE BATTERY STRAP - LONG XL | ||
366160 | ╌ | ✔ | FOAM SPACER FOR BATTERY | ||
366220 | ╌ | ✔ | INDEPENDENT SERVO MOUNT - SET - V2 | ||
366240 | ╌ | ✔ | GRAPHITE FAN HOLDER 2.2MM | ||
367210 | ╌ | ✔ | SUSPENSION PIVOT PIN (2) | ||
367220 | ╌ | ✔ | FRONT ARM PIVOT PIN (2) | ||
368010 | ╌ | ✔ | COMPOSITE SHOCK PARTS | ||
368021 | ╌ | ✔ | ALU SHOCK SPRING RETAINING COLLAR (4) | ||
368030 | ╌ | ✔ | SHOCK PISTONS - COMPLETE SET - DELRIN | ||
368031 | ╌ | ✔ | SHOCK PISTONS - COMPLETE SET - DELRIN | ||
368040 | ╌ | ✔ | ALU SHOCK ADJUSTABLE NUT (2) | ||
368041 | ╌ | ✔ | STEEL SHOCK BUSHING FOR ALU CAP (2) | ||
368042 | ╌ | ✔ | COMPOSITE SHOCK BUSHING & SHIM FOR ALU CAP (2+2) | ||
368045 | ╌ | ✔ | STEEL SCREW SHOCK PIVOT BALL WITH HEX (2) | ||
368051 | ╌ | ✔ | ALU SHOCK CAP-NUT WITH VENT HOLE (2) | ||
368091 | ╌ | ✔ | RUBBER SHOCK ABSORBER SHIM FOR ALU CAP (4) | ||
368100 | ╌ | ✔ | FRONT SHOCK ABSORBERS COMPLETE SET - V2 (2) | ||
368120 | ╌ | ✔ | ALU FRONT SHOCK BODY - HARD COATED - V2 (2) | ||
368140 | ╌ | ✔ | ALU LOWER SHOCK BODY CAP (2) | ||
368160 | ╌ | ✔ | FRONT HARDENED SHOCK SHAFT (2) | ||
368174 | ╌ | ✔ | FRONT SPRING-SET PROGRESSIVE - 2 STRIPES (2) | ||
368175 | ╌ | ✔ | FRONT SPRING-SET PROGRESSIVE L=40MM - 3 DOTS (2) | ||
368182 | ╌ | ✔ | FRONT SPRING-SET - 1 STRIPE & 3 DOTS (2) | ||
368183 | ╌ | ✔ | FRONT SPRING-SET - 1 DOT (2) | ||
368184 | ╌ | ✔ | FRONT SPRING-SET - 2 DOTS (2) | ||
368185 | ╌ | ✔ | FRONT SPRING-SET - 3 DOTS (2) | ||
368186 | ╌ | ✔ | FRONT SPRING-SET - 4 DOTS (2) | ||
368191 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 1 DOT (2) | ||
368192 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 2 DOTS (2) | ||
368193 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 3 DOTS (2) | ||
368194 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 4 DOTS (2) | ||
368195 | ╌ | ✔ | FRONT SPRING-SET L=42MM - 5 DOTS (2) | ||
368200 | ╌ | ✔ | REAR SHOCK ABSORBERS COMPLETE SET (2) | ||
368220 | ╌ | ✔ | ALU REAR SHOCK BODY - HARD COATED (2) | ||
368260 | ╌ | ✔ | REAR HARDENED SHOCK SHAFT (2) | ||
368273 | ╌ | ✔ | REAR SPRING-SET PROGRESSIVE - 2 STRIPES (2) | ||
368275 | ╌ | ✔ | REAR SPRING-SET PROGRESSIVE L=55MM - 2 DOTS (2) | ||
368283 | ╌ | ✔ | REAR SPRING-SET - 1 STRIPE & 3 DOTS (2) | ||
368284 | ╌ | ✔ | REAR SPRING-SET - 1 DOT (2) | ||
368285 | ╌ | ✔ | REAR SPRING-SET - 2 DOTS (2) | ||
368286 | ╌ | ✔ | REAR SPRING-SET - 3 DOTS (2) | ||
368287 | ╌ | ✔ | REAR SPRING-SET - 4 DOTS (2) | ||
368292 | ╌ | ✔ | REAR SPRING-SET L=57MM - 2 DOTS (2) | ||
368293 | ╌ | ✔ | REAR SPRING-SET L=57MM - 3 DOTS (2) | ||
368294 | ╌ | ✔ | REAR SPRING-SET L=57MM - 4 DOTS (2) | ||
369000 | ╌ | ✔ | XB4 SET OF HIGH-SPEED BALL-BEARINGS (22) | ||
369300 | ╌ | ✔ | XB4 MOUNTING HARDWARE PACKAGE - SET | ||
369705 | ╌ | ✔ | BODY FOR 1/10 4WD OFF-ROAD BUGGY - ALPHA 4 | ||
369912 | ╌ | ✔ | 4WD FRONT WHEEL AERODISK WITH 12MM HEX - WHITE (2) | ||
302665 | ✔ | ✔ | COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4) | ||
303123 | ✔ | ✔ | ALU SHIM 3X6X2.0MM (10) | ||
303127-K | ✔ | ✔ | ALU SHIM 3X6X4.0MM - BLACK (10) | ||
303129 | ✔ | ✔ | COMPOSITE SET OF SHIMS 3X 3X6X1MM; 1X 3X6X2MM (2) | ||
306219 | ✔ | ✔ | COMPOSITE SET OF SERVO SHIMS (4) | ||
306301 | ✔ | ✔ | ANTENNA MOUNT - THIN | ||
306310 | ✔ | ✔ | ANTENNA (2) | ||
362650 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 6MM (2) | ||
362651 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 8MM (2) | ||
362652 | ✔ | ✔ | BALL END 4.9MM WITH THREAD 10MM (2) |